BEFORE USING FOR THE FIRST TIME
Basic connections
The Video CD Player must be connected directly to a television set or an amplifier that is connected to a television or monitor. The television set or the amplifier must have audio input jacks for right and left channels and a video input jack.
Select a level, dry location free of dust and vibration, having a temperature maintained between 5 and 35°C (41 and 95°F).
Connecting the player to a TV or amplifier using the Audio Video cord
First connect the Audio Video cord — before connecting the AC power cord.
Firmly insert the yellow pin plug of the Audio Video cord in the yellow VIDEO OUT jack on the rear panel of the player; the red pin plug in the red AUDIO OUT (RIGHT) jack; and the white pin plug in the white AUDIO OUT (LEFT) jack. (The RIGHT and LEFT output jacks are for the right and left audio channels.)
Then make sure that the television, amplifier or receiver is turned off, disconnect the AC power cord, and firmly insert the pin plugs at the other end of the Audio Video cord into the matching video and audio INPUT jacks.
| AUDIO OUT |
| |
WIRELESS | RIGHT | LEFT |
|
MIC ANT. |
|
|
|
|
| VIDEO |
|
|
| OUT |
|
FREQ. |
| VIDEO OUT SELECT | |
|
|
| |
ADJUST |
|
| PAL |
|
| NTSC | PAL AUTO |
Audio Video cord
(Yellow) (Red) (White)
To input audio jack of
the television/amplifier/
receiver
To input video jack of the television/amplifier/ receiver
(WIRELESS MIC ANT. jack and FREQ. ADJUST apply only to XL- MV55GD model)
Video out select
Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL, or PAL AUTO mode according to your television system.
NTSC | for NTSC exclusive TV |
PAL | for PAL exclusive TV |
PAL AUTO | for Multisystem TV |
| PAL AUTO detects the formula of the disc (NTSC/ |
| PAL) automatically and plays the image on the |
| screen correctly. |
Notes
•When you play an NTSC disc in PAL AUTO mode on a PAL exclusive TV, the image may be distorted.
If the signal doesn’t synchronize, change the mode to “PAL”.
•Select the mode before you play the disc. If you change the mode during play, images may get distorted. In this situation stop the player and reset the mode.
•When you play an NTSC disc in PAL AUTO mode on a Multi system TV, the image may blink for a moment. This symptom is caused by the Player detecting the formula of the disc, not by a malfunction of the Player.
Connecting the power cord
IMPORTANT
Check the setting of the LINE VOLTS switch on the rear panel of the player. Change the setting if the switch is not set for the main voltage supplied to your home.
With the LINE VOLTAGE switch correctly set and the
When the power cord is connected, the STANDBY indicator on the
LINE VOLTS
AC POWER CORD
AC power cord
Wall outlet
Line voltage alteration
What is your power main voltage? Is it between 115 and 127V, or 220 and 240V? If the LINE VOLTS switch on the rear panel of the player is not set to your power main voltage, disconnect the power cord if it is already connected, and change the switch setting accordingly.
Page 2