Overview of Controls

The following is an explanation of the the basic function of controls on the front panel of the Player and the remote control. The function of some controls may be restricted in actual use depending on the

on-going operations. The remote control has twelve (12) unique function buttons in addition to those on the player.

	XL-MV55	VIDEO CD PLAYER
ON/STANDBY			KEY CONTROL
	2		KEY CONTROL	13
1	2			13
1	STANDBY	DOWN	NORMAL	UP
	POWER
KARAOKE	NORMAL PBC OFF		3
	WIRELESS	SPATIALIZER		MPX
	MIC	SPATIALIZER		MPX
4	5		6	7
	MIC 1		MIC 2	MIC 3

DISC

TRIPLE TRAY

DIGITAL ECHO

MINMAX

MIN

MAX

MIN

MAX

MIN

VIDEO INTRO

MAX

BOOK DIGEST

PHONES

KEY CONTROL

10 11

VIDEO CD

NTSC/PAL COMPATIBILITY

16 23 2

Left front panel of the Player

(Controls marked (R) have equivalents on the remote control.)

1POWER button (R)

Turns the power on and off.

2STANDBY indicator (Red)

Lights when the power cord is connected and the power is turned off. The STANDBY indicator is not lit when the player is turned on.

3KEY CONTROL button (R) Transposes the music key.

DOWN	button:	used to flatten by a half tone.
NORMAL	button:	returns to original key tone.
UP # button:		used to sharpen by a half tone.

4MODE switch

Switches the KARAOKE/NORMAL/PBC OFF mode.

KARAOKE mode:	one track playing mode.
NORMAL mode:	continuous plural tracks playing mode. Re-
	quired also for the Playback Control (PBC)
	function.
PBC OFF mode:	inhibits the Playback Control (PBC) function
	of the video CD.

5WIRELESS MIC button with indicator (XL-MV55GD only) Activates/deactivates the wireless microphone. When the WIRE- LESS MIC button is pressed, the indicator is lit as follows. green: tuning accomplished.

red:	not successful. For tuning, see page 16.

6SPATIALIZER button (R)

Changes the sound mode. (See page 13.)

7MPX button (R)

Activates the multiplex function, which switches to NORMAL (stereo), L-ch monaural and R-ch monaural.

8DIGITAL ECHO knob

Adjusts the degree of the echo effect for the microphone (1 through

3)and the wireless microphone voice.

9 MIC1 to MIC3 knobs

Adjusts volume of the microphone corresponding to MIC number. The MIC 3 knob provides simultaneous adjustment of the wireless microphone’s volume (only for the XL-MV55GD).

10 PHONE jack

Used for connecting stereo headphones. The volume is set to a predetermined level and is not adjustable.

11 KEY CONTROL jack

Used for connecting a microphone with key control function.

12 MIC jacks (1 through 3)

Used for connecting microphones (1 through 3). The jacks corre- spond to MIC 1 to 3 volume knobs located above.

Center front panel of the Player

13DISC1 to DISC3 trays

Used to load discs. To insert/remove one or up to three (3) discs, press the 0OPEN/CLOSE button located at the right of the tray corresponding to disc number.

14VIDEO INTRO button (R)

Applies to video CDs only. The introductory five (5) seconds of tracks on a video CD are displayed on the television screen in order to present the contents of the video CD.

15Display window

Shows information about the status of operation.

16BOOK DIGEST button (R)

Displays video segments you marked with the Bookmark function. (See page 14.)

Right front panel of the Player

170 (OPEN/CLOSE) buttons (Disc number 1 to 3)

Used to open and close disc trays 1 to 3 respectively. When, after opening the DISC1 tray, another 0 (OPEN/CLOSE) button is pressed, the DISC1 tray is first closed, then the other DISC tray selected is opened.

18DISC1 through DISC3 buttons with indicators (Green) (R) Plays the disc of the number indicated on the button. As soon as the disc begins playing, the indicator blinks.

19Number keys (1 to 10) (R)

Used to specify a track number for playing, changing, or program- ming. To operate numbers above ten (10), press the +10 button once. The number keys (1 to 10) are then assigned the numbers 11 to 20 instead of 1 to 10. The maximum key number assignment

is 99. In PBC function operation, the number keys are additionally utilized for the selection of menu items. See page 18 “Operation of Playback Control function”.

20PROGRAM button (R)

Any desired sequence of tracks can be programmed with the number keys and the +10 button. (On the remote control use +10) The program button cannot be used while the Playback Control function is activated.

21+10 button (R)

Used to shift the numbers assigned to the number keys to 11 or higher (maximum 99).

22 RETURN button (R)

Utilized for operation with the PBC function. This button is used to return to a menu screen during play.

Page 4