IN1502 • AppendixA-2
Appendix
Specifications
Video input
Number/signal type .................. 1 S-video
1 composite video
Connectors .................................. (1) 4-pin mini DIN female (S-video)
1 BNC female (composite video)
Nominal level............................... 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... Analog: 0.0 V to 1.0 Vp-p with no offset
Impedance ................................... 75 ohms
Horizontal frequency .................. NTSC 3.58, NTSC 4.43, PAL, SECAM
Vertical frequency ....................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Resolution range.......................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Return loss .................................... <-25 dB @ 5 MHz
DC offset (max. allowable)......... 1.5 V
Video processing
Decoder......................................... 9 bit digital
Digital sampling........................... 24 bit, 8 bits per color; 13.5 MHz standard
Colors............................................ 16.78 million
Video output
Number/signal type .................. 1 scaled RGBHV, RGBS
Connectors .................................. 1 female 15-pin HD
Nominal level............................... 0.7 Vp-p for RGB
Minimum/maximum levels ...... 0.0 V to 0.7 Vp-p
Impedance .................................... 75 ohms
Scaled resolutions ........................ 640x4801,2, 800x6001,2, 848x4801,2, 852x4801,2, 1024x7681,2, 1280x7681,2,
1360x7651,2, 1366x7681,2
1 = at 50 Hz 2 = at 60 Hz
Sync
Output type .................................. RGBHV, RGBS
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level..................................... 0 V to 1.0 Vp-p
Output level.................................. TTL: 5.0 Vp-p, unterminated
Input impedance.......................... 75 ohms
Output impedance....................... 75 ohms
Max input voltage........................ 5 Vp-p
Max. propagation delay.............. 20 ns
Polarity.......................................... Negative
Control/remote — decoder/scaler
Serial control port........................ RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations 2 = TX
3 = RX
4 = input 1 select (contact closure)
5 = GND
6 = input 2 select (contact closure)
Contact closure ............................ 9-pin female D connector (same as RS-232 connector)