Extron electronic manual Rack mounting the IN1502

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16" Screws

NOTE: Using screws longer than 3/16” will damage the unit and void the warranty.

Use 2 mounting holes on opposite corners.

Rack mounting the IN1502

4. Attach the false front panel (provided with rack shelf part #60-190-01) to the unoccupied side of the rack (as shown above), or install a second half- rack-width device in that side by repeating steps 1 through 3.

5. Attach the rack shelf to the rack using four 10-32 x ¾" bolts (provided). Insert the bolts through #10 beveled washers, then through the holes in the rack, as shown above.

IN1502 • Installation and Operation 2-3