The syntax for setting a special function is X? * X! # where X? is the function number and X! is the
value. To view a function’s setting, use X? # where X? is the function number. In the following table the values of the X? variable are different for each command/function. These values are given in the rightmost column.
Command/response table for special function SIS commands
| Command | ASCII Command Response |
| values | |
| X! | ||||
|
| (host to scaler) | (scaler to host) | and additional descriptions | |
| PAL file mode (2:2 pulldown detction) |
|
|
| |
|
|
|
|
|
|
| Set mode on | 18*1# | PDn1 | Set PAL file mode on. | |
| Set mode off | 18*0# | PDn0 | Set PAL file mode off. | |
|
|
|
|
|
|
| View file mode status | 18# | PDn X2 | Show PAL file mode status. | |
| Blue mode |
|
|
|
|
|
|
|
|
|
|
| Set Blue mode on | 8*1# | Blu1 | Set Blue mode on. | |
| Set Blue mode off | 8*0# | Blu0 | Set Blue mode off. | |
|
|
|
|
|
|
| View Blue mode status | 8# | Blu X2 | Show Blue mode status. | |
Auto switch
Set Auto switch mode on | 10*1# | Aut1 |
Set Auto switch mode off | 10*0# | Aut0 |
View Auto switch mode status | 10# | Aut X2 |
Set Auto switch mode on. Set Auto switch mode off.
Show Auto switch mode status.
H Format (sync output format)
Set to horizontal sync | 15*1# | HFm0 | Set H format to off/0 |
|
|
| (horizontal sync, default). |
Set to composite sync | 15*0# | HFm1 | Set H format to on/1 |
|
|
| (composite sync). |
|
|
|
|
View H Format status | 15# | HFm X2 | Show H format mode status. |
|
|
|
|
IN1502 • Serial Communication |
