Installation and Operation, cont’d
IR 901 Infrared Remote Control
The IR 901, shown at right, replicates all of the front panel controls except the Menu and Next buttons. If Executive mode has been enabled on the IN1502, input selection and adjustments can still be made from the IR 901. You must use the IN1502’s front panel, a host computer, or an
The topmost part of the IR 901 features three Aspect Ratio Preset buttons (not functional), a Freeze button, and two input selection buttons (1 and 2). Inputs 3, 4, 5, and 6, and the Take button are not functional. The middle portion of the IR 901 features the size and centering buttons. The bottom part contains the adjustment controls for color, tint, brightness, contrast, and detail adjustments. The sharpness buttons are not functional.
Freeze an input
To freeze the input being displayed, press the Freeze On/Off button. To unfreeze the input, press the Freeze button again.
Select an input
To select an input source, press an input button (1 or 2).
Size and center
Use the Size and Center buttons to adjust the sizing and centering aspects of a displayed image.
Image adjustments
The color, tint, brightness, contrast, and detail of a displayed image may be increased or decreased by using the appropriate Image Adjustment buttons at the bottom of the IR 901.
