12ENINITIALSETTINGS(cont.)
MENU | OK |
|
CH
1 2 3
2
4 5 6
7 8 9
0 4
1
3 | OK |
MENU |
|
Semi-Auto
You can change the Host Channel/D.S.T. /Time Zone setting manually.
SET AUTO CLOCK TO ON
5 At the Clock Set screen, press OK or %repeatedly to move the highlight bar to "AUTO CLOCK" and press CH 5° or %Þ to set to "ON".
a– To select the Host Channel — go to step 6
b– To select the D.S.T. mode — go to step 7
c– To select the Time Zone — go to step 8
NOTE:
The time that has been set previously will be erased when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME ZONE" setting is changed.
SELECT HOST CHANNEL
6 You can either select "AUTO" or enter a PBS channel number. Move the% highlight bar to "HOST CH" by pressing OK or , then press CH 5° or %Þ to set to "AUTO" or the desired PBS channel number.
NOTE:
There are some PBS channels that do not transmit clock setting data.
7 | SELECT D.S.T. MODE |
|
You have three choices: |
| |
a– Select "AUTO" and the adjustment to your VCR's |
| |
clock will be made according to the incoming signal | ||
| from the host channel. |
|
| b– Select "ON" and the adjustment will be made based | |
| on the clock itself. |
|
| c– Select "OFF" if Daylight Saving Time does not apply | |
| to you. | % |
| Move the highlight bar to "D.S.T." by pressing OK or | , |
| then press CH 5° or %Þ to select the desired mode. |
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.