JVC HR-J255SA specifications Recording, Playback, Or press Record on the recorder

Page 17

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

DURING B.E.S.T.

 

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP (or EP) modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording

(☞ pg. 15).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 16.

EN17

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

●When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 16.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HR-J255SA Do not place the recorder Safety PrecautionsAuto Head Cleaner Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Channel Set Access Video Channel SET ModeEN I Nitial Sett Ings With RF ConnectionPress to finish the setting Exit Video Channel SET ModeSET Video Channel With AV ConnectionSET Date Auto Set UpSET Time Select TV System During Auto Set UpStart Auto Channel SET Major Countries TV SystemENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderClock Set Select LanguagePlace the pointer next to Initial SET, then pressLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate SLOW-MOTION PlaybackReturn to Automatic Tracking Adjust Tracking ManuallyActivate Repeat Playback EN PlaybackActivate Index Search Tape Position IndicatorActivate Instant Review Index Search Next Function MemoryBasic Recording Reset Counter Recording FeaturesEngage ITR Mode Select Channel to WatchS.T. Picture System Access Main Menu ScreenLoad a Cassette Return to Normal ScreenOr press Record on the recorder RecordingPlayback Access Initial SET Screen SetupEN Timer Recording SET-UPReturn to Normal Screen Enter Receiving Channel Position NumberPress Push JOG %Þor Or Push JOG%Access Showview Screen Timer ProgrammingAccess Showview NumberEngage RECORDER’S Timer ModeEnter Programme Stop Time Express Timer ProgrammingEnter Programme Date Enter Channel PositionScreen for about 5 seconds, then normal screen Or OK. Program Completed appears onAppears Repeat steps 1 8 for each additional programmeCancel or Replace a Programme Disengage Timer ModeReturn to Timer Mode Timer RecordingAuto Timer Auto SP→LP TimerEdit To Another Video Recorder Input ModeMake Connections SET Recording DECK’SSource player Edit From a Camcorder Or Another Video RecorderSET RECORDER’S Input Mode Display Setting Of The Colour System Select ButtonsMode Description Off-Air RecordingRecorded tape HR-J255SA Tape-To-Tape EditingRecorded tape Playback equipmentSelect Auto CH SET Access Tuner SET ScreenTuner SET Press OK or Push JogþAccess Channel List Access Tuner SETSelect Position SET Desired StationEN Tuner SET Access Channel ListDelete a Channel Swap Channel PositionsFINE-TUNE Fine-Tuning ChannelsEN Troubleshooting Recording Timer againNew one. pg OubleshootingPlayback Recording Questions and Answer S E NFront View IndexDisplay Panel TV VOL +/-, TV Muting Remote ControlSupplied fresh battery actual Specification SMaximum recording time Rotary two-head helical scanEMO Memo HR-J255SA
Top Page Image Contents