JVC HR-J255SA specifications SET Video Channel, Exit Video Channel SET Mode, With AV Connection

Page 5

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 4), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

Press to finish the setting.

EN5

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

1 Hold down STOP/EJECT on the recorder until the display panel shows the following.

SET VIDEO CHANNEL

2 Press OK, then press TV PROG – until the display panel shows the following.

Now the video channel is set to off (– –).

EXIT VIDEO CHANNEL SET

MODE

3 Press to finish the setting.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the VCR power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HR-J255SA Do not place the recorder Safety PrecautionsAuto Head Cleaner Basic Connections Check ContentsSituate Recorder Connect Recorder to MainsVideo Channel Set Access Video Channel SET ModeEN I Nitial Sett Ings With RF ConnectionPress to finish the setting Exit Video Channel SET ModeSET Video Channel With AV ConnectionSET Date Auto Set UpSET Time Select TV System During Auto Set UpStart Auto Channel SET Major Countries TV SystemENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderClock Set Select LanguagePlace the pointer next to Initial SET, then pressLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate SLOW-MOTION PlaybackReturn to Automatic Tracking Adjust Tracking ManuallyActivate Repeat Playback EN PlaybackActivate Index Search Tape Position IndicatorActivate Instant Review Index Search Next Function MemoryBasic Recording Reset Counter Recording FeaturesEngage ITR Mode Select Channel to WatchS.T. Picture System Access Main Menu ScreenLoad a Cassette Return to Normal ScreenOr press Record on the recorder RecordingPlayback Access Initial SET Screen SetupEN Timer Recording SET-UPReturn to Normal Screen Enter Receiving Channel Position NumberPress Push JOG %Þor Or Push JOG%Access Showview Screen Timer ProgrammingAccess Showview NumberEngage RECORDER’S Timer ModeEnter Programme Stop Time Express Timer ProgrammingEnter Programme Date Enter Channel PositionScreen for about 5 seconds, then normal screen Or OK. Program Completed appears onAppears Repeat steps 1 8 for each additional programmeCancel or Replace a Programme Disengage Timer ModeReturn to Timer Mode Timer RecordingAuto Timer Auto SP→LP TimerEdit To Another Video Recorder Input ModeMake Connections SET Recording DECK’SSource player Edit From a Camcorder Or Another Video RecorderSET RECORDER’S Input Mode Display Setting Of The Colour System Select ButtonsMode Description Off-Air RecordingRecorded tape HR-J255SA Tape-To-Tape EditingRecorded tape Playback equipmentSelect Auto CH SET Access Tuner SET ScreenTuner SET Press OK or Push JogþAccess Channel List Access Tuner SETSelect Position SET Desired StationEN Tuner SET Access Channel ListDelete a Channel Swap Channel PositionsFINE-TUNE Fine-Tuning ChannelsEN Troubleshooting Recording Timer againNew one. pg OubleshootingPlayback Recording Questions and Answer S E NFront View IndexDisplay Panel TV VOL +/-, TV Muting Remote ControlSupplied fresh battery actual Specification SMaximum recording time Rotary two-head helical scanEMO Memo HR-J255SA
Top Page Image Contents