Go-Video TW1730 manual Shortcut Press the Source button, Press the Exit button to exit the menu

Operation

You can change the video source of the PIP window to any externally connected device.

Shortcut: Press the SOURCE button.

● The source of the PIP window is changed to the next video signal of any externally connected device.

Press the MENU button.

● The OSD MENU is displayed.

Select FUNCTION SETUP using the

TV CH+/- buttons and then press the

VOL+ button.

Select PIP SETUP using the TV CH+/- buttons and then press the VOL+ but- ton.

● The PIP SETUP menu is displayed.

Select PIP SOURCE using the TV CH+/- buttons and then press the VOL+ button.

Select the desired external input signal.

● The video source is changed in the following order: TV ➔ VIDEO ➔

S-VIDEO ➔ DTV

Press the EXIT button to exit the menu.

Note

● Since this product has a single tuner, you cannot watch two TV channels simultaneously in PIP mode.

37