ACTIVATE HIGH-SPEED
SEARCH
1 During playback or still, turn the SHUTTLE ring all the way to the right for forward
●For forward
●For reverse
OR
During playback or still, press FF for forward high- speed search, or REW for reverse
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or REW. When released, normal playback resumes.
EN25
Instant ReView
At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent
1 |
| ACTIVATE INSTANT REVIEW |
| After ensuring that the Timer mode is disengaged, press | |
| REVIEW. | |
| ● The power comes on and the VCR rewinds to the index | |
|
| |
|
| code indicating the start of the last |
|
| program, then begins playback automatically. |
|
| ● You can access a program |
|
| from the current position on the tape. If, for example, |
|
| you have 5 programs recorded and you want to |
|
| watch the third one, press REVIEW three times. |
|
| ● If necessary press REW or FF when play starts to |
|
| search visually to find the very beginning of the |
|
| desired program. |
|
| ● If the tape is already rewound when REVIEW is |
|
| pressed, it will play the tape from the beginning. It |
|
| will not fast forward to an index code. |
|
| ● The Instant Review function will also operate if the |
|
| VCR's power is on. |
|
|
|
Skip Search
SKIP OVER UNWANTED SECTIONS
1 Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a
NOTES:
●To return to normal playback during a Skip Search, press PLAY.
●If the Skip Menu screen appears, see page 32.
Index Search
Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.
START SEARCH
1 While the tape is stopped, press SHUTTLE PLUS ª or £ (Þor %).
ACCESS DISTANT CODE
2 To access a recording
●If necessary press REW or FF when play starts to search visually to find the very beginning of the desired program.
NOTE:
Manual Tracking
Once playback begins, the VCR’s automatic tracking function is engaged. If tracking noise appears in the picture, you can override this and make the adjustment manually.
ENGAGE MANUAL
TRACKING MODE
1 During playback, press the CH5 and ° buttons on the
VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.
ADJUST MANUAL
TRACKING
2 Press CH 5(+) or °
RE-ENGAGE AUTOMATIC TRACKING
3 Press the CH5 and ° buttons on the VCR's front panel simultaneously.
●When automatic tracking is
NOTES:
●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.
●Manual tracking is possible during
An index code is not placed on the tape when recording is paused and then resumed.