| UMBER | 2 | 3 |
|
| 1 |
| ||
| "8" |
| 2 |
|
| 5 | 6 |
| |
| 4 |
| ||
NUMBER "7" | 7 | 8 | 9 | NUMBER "9" |
|
|
|
| |
|
| 0 | 4 | TIMER |
|
|
| ||
PROG. | 1 |
|
|
|
|
|
| SP/EP |
|
|
|
| 3 | OK |
EN41
8 |
| SET TAPE SPEED |
| Press SP/EP to set the tape speed. | |
|
| RETURN TO NORMAL |
9 |
| SCREEN |
| Press PROG. or OK. "PROGRAM COMPLETED" | |
| appears on the screen for about 5 seconds, then normal | |
| screen appears. | |
10 |
| ENGAGE TIMER MODE |
| Press TIMER. The VCR turns off automatically and "ä" | |
| is displayed on the display panel. |
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 3 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials
NOTES:
●To disengage the timer before recording starts, press TIMER again. Pressing once more
●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes.
●Programs that start after midnight must have the next day’s date.
●After timer recording is completed, the VCR’s power goes off automatically.
●You can program the timer while a regular recording is in progress; the
●If the end of tape is reached during timer recording, the cassette is automatically ejected.
●When
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS receiver | PROGRAM 1 | ||||||
(unless "DBS RECEIVER SET" is | |||||||
|
|
| |||||
set to "OFF" ☞ pg. 20), the | START | STOP | |||||
BAND indication (TV or CATV |
| 8:00AM = | 9:00PM |
| |||
| DATE | CH | |||||
or DBS) appears under the |
|
| |||||
| 12/24/98 | 110 SP | |||||
channel number display. If the |
| THU | DBS | ||||
channel number that has been | PRESS |
| |||||
entered requires that the band | 9=WEEKLY, 7=DBS), THEN (0K) |
| |||||
PRESS (PROG.) TO END |
| ||||||
be set, "7=DBS" is displayed |
|
|
| ||||
on the screen. Press the NUMBER key "7" to select the | |||||||
desired band. |
|
|
| ||||
a– TV | : To | ||||||
| on the VCR. |
|
|
|
b– CATV : To
c– DBS : To
●If "BAND" is set to "TV" at the Tuner Set screen (☞ pg.14) and "CABLE BOX SET" is set to "OFF" at the Cable Box Set screen (☞pg. 17), CATV will not be displayed on the Program screen; If "BAND" is set to "CATV" or "CABLE BOX SET" is set to "ON", TV will not be displayed.
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
|
| |
Program 2 |
|
|
|
|
|
| Not recorded |
|
| CH40 |
|
|
|
Pattern 2: The program that is broadcast earlier will be recorded.
10:00 | 11:00 | 12:00 | ||||
Program 1 |
| CH10 |
|
|
|
|
Program 2 |
|
|
| Not recorded | ||
CH40 |
|
|
Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
|
|
|
|
| CH40 |
Not recorded