EN
51
A/B
NUMBER "1" | 1 | 2 |
|
|
4 5
7 8
0
1
STOP
POWER
3 NUMBER "2"
2
6
9
TIMER
4
Control Two JVC VCRs
The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR to respond to B code signals.
|
| UNPLUG VCR'S POWER |
1 |
| CORD |
| Unplug from the AC outlet. | |
|
| SET REMOTE CONTROL |
2 |
| CODE |
| While holding down A/B on the remote control, press | |
| the NUMBER key "2" and then press STOP. | |
3 |
| PLUG IN POWER CORD |
| Plug back in to the AC outlet. | |
4 |
| TURN VCR POWER ON |
| Press POWER on the remote. |
The VCR will now respond only to
To set the VCR back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.
You can control two VCRs with the same remote control by switching the remote's code between A and B (☞ Step 2).
(Ex.) To set remote control B code:
MBR SET
A/B
2 STOP
Release
Hold | Press in succession | |
down | ||
|