JVC HR-J249EE, HR-J448EE, HR-J245EE Tape-To-Tape Editing, Playback equipment, Dubbed tape

Page 29

EN29

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

PAL

MESECAM

NTSC

Manual switching

Your recorder

Playback circuit

PAL

MESECAM

NTSC[PAL

NTSC 3.58 MHz

Manual switching

NTSC 4.43 MHz

Built-in

RFconverter

K, I, G

	Multi-system receiver
	PAL
	(B/G, D/K, I)
RF OUT
	Multi-system monitor
	PAL
VIDEO OUT	SECAM
VIDEO OUT	NTSC 3.58
AUDIO OUT	NTSC 4.43

NOTES:

When viewing NTSC tapes on a PAL TV set:

●The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

●The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri- ate position which corresponds to the TV system you have selected at the TV System Select screen.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape	Playback equipment	Your recorder

Dubbed tape

PAL

MESECAM

SECAM

NTSC

PAL

MESECAM

SECAM

NTSC 3.58 MHz

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

PAL

MESECAM

NTSC

NTSC 4.43 MHz

NTSC 4.43 MHz

Image 29

Contents HR-J448EE HR-J249EE HR-J248EE HR-J245EE HR-J448EE Safety PrecautionsHR-J249/248/245EE Do not place the recorderBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsAuto Channel Set Auto Set UpStart Auto SET UP Video Channel Set Select Language Select Television System Access Initial SET Screen Access Main Menu ScreenAccess Clock SET Screen Clock SetOn-Screen Displays Load a Cassette Basic PlaybackPoint Start PlaybackPlayback Playback FeaturesActivate HIGH-SPEED Search Return to Automatic Tracking Adjust Tracking ManuallyActivate Repeat Playback Manual TrackingSET Counter Memory Activate Index SearchActivate Counter MemoryBasic Recording Recording Features Recording S.T. Picture SystemWith HR-J448EE PlaybackChannel Station Guide Prog Position Name Setup HR-J249EE onlyGuide Program Number Set Start Setting Access Showview Setup ScreenInput Guide Prog Number Input Receiving ChanCheck Input Data Engage Timer ModeEnter Showview Regarding Guide Program Number Set Access Programme Regular Timer ProgrammingStart Time Enter Channel PositionTimer Timer ModeAuto SP/LP Timer HR-J448EE only Engage RECORDER’SAccess Auto Timer Access ProgrammeRevise Programme InformationSET Remote Control Unplug Vcrs PowerPlug in Power Cord Turn VCR Power onEdit To Or From Another Video Recorder SET Recording DECK’S Input ModeMake Connections Start Source PlayerEdit From a Camcorder SET RECORDER’S Input ModeStart Camcorder Start RecorderMode Display Description Setting Of The Colour System Select ButtonsOff-Air Recording ModeDubbed tape Tape-To-Tape EditingPlayback equipment Select TV System Access Tuner SET ScreenSelect Auto CH SET Mode Perform Tuning Access Tuner SETSelect Position Screen Select BandSwap Channel Positions Access Channel ListDelete a Channel FINE-TUNE Fine-Tuning ChannelsControl Your TV Using Additional Buttons Multi-Brand Remote ControlSET TV Brand Code TRY Operating TVQuestions and Answer S E N Troubleshooting Recording Timer againOubleshooting J245EE IndexRear View How To Use Installing BatteriesSpecifications Memo HR-J448/249/248/245EE