34
EN
REMOTE
CON
TROL
Multi-Brand
Remote
Control
V |
| TV/VCR |
1 | 2 | 3 |
4 | 5 | 6 |
NUMBER | 8 | 9 |
7 | ||
| 0 |
|
2 |
|
|
|
| TV PROG+/– |
1 | 3 | Á |
¦ | 7 | 8 |
STOP | 4 | ¢ |
1 | ||
| ||
3 |
| PUSH JOG |
OK |
|
|
TV | VOL |
|
|
|
Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled by setting the appropriate switch on the remote control.
Before you start, turn on the TV using its remote control.
NOTE:
If your TV is a JVC, you don’t have to set the code in step 1. Go to step 2.
SET TV BRAND CODE
1 Refer to the chart below. While holding down TV, enter your TV’s brand code using the NUMBER keys, then press STOP.
●You don’t have to repeat this step until you replace your remote control’s batteries.
TRY OPERATING TV
2 Press 
on the remote to turn the TV off. If it goes off, try other operations.
●The 
button, TV/VCR button, TV PROG +/–
button, TV VOL +/– (or %/Þ) button and 
(MUTE) button on the remote can all be used to operate the TV.
●To operate the TV, press TV to set the remote control to the TV mode.
●To return the remote to video recorder control, press VCR to set the remote control back to the VCR mode.
IMPORTANT
Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.
Control Your TV Using Additional Buttons
TV BRAND NAME | CODE |
|
|
JVC | 01 |
PANASONIC | 02 |
SONY | 03 |
SHARP | 04 |
TOSHIBA | 05 |
MITSUBISHI | 06 |
HITACHI | 07 |
SANYO | 08 |
FUNAI | 09 |
AIWA | 10 |
DAEWOO | 11 |
SAMSUNG | 12, 16 |
GOLDSTAR | 13 |
THOMSON | 14 |
FERGUSON | 15 |
PHILIPS | 16 |
GRUNDIG | 17 |
ITT | 18 |
MIVER | 19 |
FINLUX | 20 |
NOKIA | 21 |
NEC | 22 |
|
|
The NUMBER keys on the remote can also be used to select the TV’s channel by setting the remote control to the TV mode.
1Press the TV button. |
|
2Use the NUMBER keys, and the DIGIT ENTRY ( | ) |
button, the PUSH JOG button or the OK button to select the TV’s channel.
●With televisions under Code 01, 02, 03, 05, 07, 15, 16 or 22, the DIGIT ENTRY button corresponds to the
●With televisions under Code 01, 06, 08, 18 or 19, the PUSH JOG % button corresponds to the 10 + button, and the PUSH JOG %button corresponds to the 20 + button of your TV’s remote control.
●With televisions using Code 03, the OK button corre- sponds to the ENTER button of your TV’s remote control.
NOTE:
The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.