Checking, canceling or changing programme settings

ADisengage timer recording standby mode

Press #, then press 1.

●When “AUTO TIMER” is set to “ON” ( 12), press only 1.

B Access Program Check screen

Press ".

C Access Program screen

Press " again. Each time you press ", the next programme’s screen appears.

D Cancel or change programme setting

To cancel a programme, press &.

To change a programme, press the

appropriate button: START+/–, STOP+/–,

DATE+/–,DAILY (number key “8”), WEEKLY (number key “9”), PR+/–,VPS/PDC (number key “7”) and/or SP/LP (p).

●To change “TV PROG” to “SAT” for the channel position, press the number key “0”.

EReturn to normal screen

Press " repeatedly until no Program screen is shown.

FRe-engage timer recording standby mode

Press #. The recorder turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON” ( 12), the timer recording standby mode automatically resumes when you turn off the recorder.

Automatic Satellite Programme Recording

You can automatically record a satellite programme which is timer-programmed on your satellite receiver.

AConnect a satellite receiver to the L-2 IN/DECODER connector on the rear panel.

BSet timer programme on satellite receiver referring to its instruction manual.

CLoad a cassette with the record safety tab intact.

DSet “L-2 SELECT” to “A/V” or “SAT”. ( 13)

ETo set the tape speed, press SP/LP (p). The current setting for the tape speed appears on the display panel or the screen for about 5 seconds. Press SP/LP (p) again to change the setting while tape speed is displayed.

FPress SAT# for more than 2 seconds. The recorder turns off automatically and enter the Automatic Satellite Programme Recording mode (the SAT# indicator lights up). When signals come into the recorder from the satellite receiver, the recorder starts recording (the SAT# indicator blinks). The recorder stops recording and turns off when signals stop coming in.

NOTES:

●Be sure not to turn on the satellite receiver before the programme starts broadcasting; otherwise, the recorder starts recording when the satellite receiver is turned on.

●To disengage the Automatic Satellite Programme Recording mode, press SAT# (the SAT# indicator goes off).

●Depending on the type of satellite receiver, Automatic Satellite Programme Recording may not be compatible.

●B.E.S.T. does not work in the Automatic Satellite Programme Recording mode.

●Power Save mode does not work in the Automatic Satellite Programme Recording mode.

●Just Clock does not work in the Automatic Satellite Programme Recording mode.

— 10 —