JVC HR-J694EU, HR-J693EU, HR-J691EU specifications Editing, System Connections

Editing

Editing with another video recorder or a camcorder

You can use your recorder as the source player or the recording deck. You can use a camcorder as the source player and your recorder as the recording deck. Refer also to the other components’ instruction manuals for connection and its operations.

AMake connections

Connection with another video recorder

AWhen using your recorder as the source player …

…connect its L-1 IN/OUT connector to the recording deck. B When using your recorder as the recording deck …

…connect its L-1 IN/OUT or L-2 IN/DECODER connector to the source player.

Connection with a camcorder

Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s L-1 IN/OUT or L-2 IN/DECODER connector via a cable adapter.

BLoad cassettes

Insert the playback cassette into the source player and the cassette to be recorded on into the recording deck.

CSelect input mode on recording deck

Select the correct external input on the recording deck. On this recorder, press AUX and/or PR+/–.

Select “L-1” for the L-1 IN/OUT connector, or “L-2” for the L-2 IN/ DECODER connector.

DSelect edit mode

Select the appropriate edit mode for the components if such a mode is equipped.

●On this recorder, set “PICTURE CONTROL” to “EDIT”. ( 12)

EStart playback

Engage the Play mode of the source player.

FStart recording

Engage the Record mode of the recording deck.

System Connections

NOTE:

When you select a country in Central or Eastern Europe for country setting, you cannot use decoder with this recorder.

Connecting to a satellite receiver

Connect the decoder to the satellite receiver’s connector if you have a decoder, L-1 IN/OUT connector to TV’s connector, and L-2 IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.

●Set “L-2 SELECT” to “A/V”. ( 13)

●To record a programme via the satellite receiver, set the input mode to “L-2” by pressing AUX and/or PR+/–.

●To receive a scrambled broadcast, descramble the signal with the satellite receiver.

●For details, refer to the instruction manual for the satellite receiver and decoder.

Connecting/Using a decoder

You can enjoy the variety of programming that is available through scrambled channels.

ASet “L-2 SELECT” to “DECODER”. ( 13)

BConnect the recorder’s L-2 IN/DECODER connector to the decoder’s 21-pin SCART connector using a 21-pin SCART cable.

CPerform the procedure as described in “When receiving a scrambled broadcast” ( 14).

Connecting/Using a stereo system

You can listen to the soundtrack through your stereo system. Connect the AUDIO OUT L and R connectors on the recorder to the AUX IN or TAPE MONITOR connectors on your stereo system’s receiver or amplifier.

●When listening to sound through the connected stereo system, turn the TV’s volume down completely.

— 11 —