Timer Recording, Express Timer Programing

PRESS (+/–, SP/EP, 8=DAILY 9=WEEKLY), THEN (0K) PRESS (PROG.) TO END

– –:––AMCH

– – – SP

– –:––AMDATE

– –/––/– –

STOP

START

PROGRAM 1

– Timer Recording –

Timer Recording

Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.

NOTES:

●If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●To timer-record cable channels, be sure to keep the cable box turned on with the correct channel selected.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections (if the lithium battery is not exhausted).

To use the VCR while it is in timer recording standby mode

Press #, then press 1. After you use the VCR, press # again to put the VCR into timer recording standby mode.

Checking, canceling or changing program settings

ADisengage timer

Press #, then press 1.

●When “AUTO TIMER” is set to “ON”, you do not have to press

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically.

BAccess Program Check screen

Press " (CHECK).

CAccess Program screen

Press " (CHECK) again. Each time you press " (CHECK), the next program’s Program screen appears.

PR START		STOP	CH	DATE
1	8:00P	10:00	12	12/24
2	10:00A	10:45	40	12/25
3	11:30P	1:00	125	12/25
4
5
6
7
8
	PRESS (CHECK) TO NEXT
	PROGRAM 1
	START		STOP
	8:00 PM		10:00 PM
	DATE		CH
	12/24/00		12	SP

PRESS (CANCEL) TO CANCEL PRESS (CHECK) TO NEXT

APress PROG on the Remote to access the Program screen.

B Press START+/–,STOP+/–,DATE+/– or PR+/– repeatedly to enter the start

time, stop time, date or channel. ● Press and hold START+/– or

STOP+/– to increase the time in 30-minute intervals.

● To set the tape speed, press SP/EP (p).

● To timer-record daily (Monday–Friday) or weekly serials, press DAILY or WEEKLY. Pressing the button again makes the “DAILY” or “WEEKLY” display disappear.

CPress OK or PROG.

●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display”.

DPress #. The VCR turns off automatically and “#” is displayed on the display panel.

DCancel or change program setting

To cancel a program, press & (CANCEL) when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, PR+/–, and/or SP/EP (p) when the Program screen on which you want to make changes is shown.

EReturn to normal screen

Press " (CHECK) repeatedly until no Program screen is shown.

FReengage timer recording standby mode

Press #. The VCR turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.