– Other Functions –
Changing Remote Control Code
This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals. When using two JVC VCRs, set two VCRs and their Remotes to different codes, so that you can operate these VCRs separately.
ASet remote control code for Remote
APress and hold VCR.
BPress the Number key “2”.
CPress OK, and release VCR.
●The Remote now can transmit B code control signals.
BCheck remote control code for VCR
Press and hold 4 on the VCR for more than 5 seconds while the VCR is turned off. The code currently set appears on the display panel.
CChange code for VCR
Press any key on the Remote. The VCR now responds to B code control signals.
●To set the Remote and the VCR back to A code control signals, repeat the same procedure as shown above except pressing the Number key “1” in step B of 1.
To control two VCRs with the same Remote
You can control two JVC VCRs by switching the remote control code for the Remote between A and B ( step A), keeping two VCRs to different control codes.
●To change only the remote control code for the Remote, DO NOT perform steps B and C.
Editing
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.
AMake connections
Example: When using this VCR as the playback VCR
This VCR (for playback)
To AUDIO/VIDEO OUT
Audio/video cable (not supplied)
To audio/video input
Another VCR (for recording)
●When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
BLoad cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
CSelect input mode on recording VCR
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR);
Select
On the Remote
Press AUX or
On the VCR
Press PAUSE[CH], and then FF[CH+] or
DSelect edit mode
Set the edit mode to “ON” for the VCRs if such a mode is equipped.
●On this VCR, set “PICTURE CONTROL” to “EDIT”.
EStart playback
Press PLAY (4) on the playback VCR.
FStart recording
Press REC (7) on the recording VCR.