JVC LPT0534-001A, HR-J6008UM manual TV Brand Setting, Turn on TV, Set TV brand code, Operate TV

– Other Functions –

BLUE BACK — ON/OFF

When this function is set to “ON”, the TV screen becomes all blue in the following cases:

●When receiving a channel not in use.

●When stopping playback.

NOTE:

When you want to receive an unstable channel with poor signals, set this function to “OFF”.

2ND AUDIO RECORD — ON/OFF

● When this function is set to “ON”;

If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks. The main audio is not recorded.

If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal tracks.

● When this function is set to “OFF”, the SAP audio cannot be recorded.

NOTES:

When the channel is changed on the VCR;

● The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.

● The “SAP” indication appears on the screen for about 5 seconds if the program is a SAP broadcast.

● Both indications appear when a stereo program is accompanied by SAP sound.

AUDIO MONITOR — HI-FI/HI-FI L/HI-FI R/NORM/MIX

This VCR can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape containing two separate audio programs on the Hi-Fi tracks, you can choose either one by selecting either “HI-FI L” or “HI-FI R”.

HI-FI: Normally select this. Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back.

NORM: Sound on the normal track is played back.

MIX: Both sounds on the Hi-Fi track and normal track are mixed and played back.

NOTES:

●While playing back a monaural tape, sounds on the normal track will be heard regardless of this setting.

●If RF connection is used for viewing pictures on the TV, sound will be monaural even though you select “HI-FI”.

●You can also use the AUDIO button on the Remote to select the desired monitor sound.

Multi-Brand Remote Control

This Remote can control some functions of remote controllable TVs, cable boxes or DBS (Direct Broadcast Satellite) receivers listed below. Without setting, you can control a JVC TV.

NOTES:

●Some unit’s brands have more than one code. If the unit does not function with a specified code, try other codes.

●Depending on the type of unit, some or all functions cannot be operated using this Remote.

●It’s not possible to operate a unit not equipped with a remote sensor.

●It’s not possible to set the Remote for both your cable box and a DBS receiver at the same time.

●Once you have set the Remote to operate the unit, you do not have to set it until you replace the batteries from the Remote.

TV Brand Setting

ATurn on TV

Turn on the TV using the Power button on the TV or its Remote.

BSet TV brand code

APress and hold TV.

BPress the Number keys to enter your TV’s brand code.

CPress OK, and release TV. The TV should turn off.

COperate TV

First, press TV to set the Remote to TV mode, then press one of the following buttons: POWER 1, TV/VCR, TV PR+/–, ^ (TV Muting), TV %+/– (Volume), and the Number keys.

●For some brands, you must press ENTER after having pressed the Number keys to enter a channel number.

TV BRAND	CODE	TV BRAND	CODE
JVC	01	PHILICO	05, 09, 17
CCE	03	PHILIPS	03
GRADIENTE	02, 11, 12, 16	RCA	12
GRUNDIG	14	SANYO	04
LG/GOLDSTAR	11	SAMSUNG	10
MITSUBISHI	08	SHARP	06
NEC	16	SONY	15
NOBLEX	18	TOSHIBA	07
PANASONIC	13