JVC HR-J674, HR-J673, HR-J470, HR-J472EU, HR-J672, HR-J671, HR-J272EU, HR-J270 About Ntsc Playback

Page 39

 

 

EN 39

 

 

* The default setting is bold in the table below.

 

 

 

8 L-2 SELECT

 

Set this function to the appropriate mode depending on the

L-2:

To use this recorder as the recording

type of unit connected to the rear panel AV2 (L-2) IN/

 

deck with the player connected to

DECODER connector of the recorder.

 

the AV2 (L-2) IN/DECODER

NOTES:

 

connector, or to use the satellite

 

receiver connected to the AV2 (L-2)

● If you have a decoder connected to the AV2 (L-2) IN/DECODER

 

IN/DECODER connector.

connector, be sure to set “L-2 SELECT” back to “DECODER”

DECODER:

after editing.

To use a decoder connected to the

● If you’re not connecting a decoder to the AV2 (L-2) IN/

 

AV2 (L-2) IN/DECODER connector.

SAT:

DECODER connector, leave “L-2 SELECT” set to “L-2”.

To view a satellite programme with

● The default setting is “L-2”; if the recorder’s memory backup has

 

the TV set while the recorder is

expired due to a power cut or because the AC was removed

 

turned off. ( pg. 33)

from the recorder, “L-2” will be automatically selected when the

 

 

power is restored to the recorder. If you are using a decoder, be

 

 

sure to set “L-2 SELECT” back to “DECODER”.

 

 

● When “L-2 SELECT” is set to “SAT”, “SAT” appears on the

 

 

screen or front display panel instead of “L-2”.

 

 

8 COLOUR SYSTEM

You can play back PAL, NTSC and MESECAM tapes, or

PAL/NTSC:

To record PAL signals, or play back a

record PAL and SECAM* signals on this recorder. Select the

 

PAL or NTSC tape.

appropriate colour system.

MESECAM:

To record SECAM signals, or play

* SECAM signals will be recorded as MESECAM on this recorder;

 

back a MESECAM tape.

MESECAM is the designation for tapes with SECAM signals that

 

 

have been recorded on a MESECAM-compatible PAL video

 

 

cassette recorder.

 

 

NOTES:

 

 

About NTSC Playback

 

 

● Some TVs shrink the picture vertically and place black bars at

 

 

the top and bottom of the TV screen. This is not a malfunction

 

 

on the part of either the video recorder or the TV.

 

 

● The picture may roll up and down. This can be corrected using

 

 

the V-HOLD control found on some TVs. (This cannot be

 

 

corrected if the TV does not have a V-HOLD control.)

 

 

● The counter and tape remaining time readings will be incorrect.

 

 

● During search, still, or frame-by-frame playback, the picture will

 

 

be distorted, and there may be a loss of colour.

 

 

● Depending on the type of TV, the top and bottom portions of

 

 

superimposed displays may be cut off during NTSC playback.

 

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Press rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channelJust Clock Language for the on-screen display12 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller14 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 16 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed Search18 EN Manual TrackingInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory20 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherSet the counter display Reset the counter22 EN Tape Remaining TimeRecording Playback24 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users26 EN Express Timer ProgrammingPress PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position28 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify30 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme RecordingStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder 32 ENSatellite receiver Decoder Back of recorder Connecting To a Satellite ReceiverSet the tuner Select the input mode34 EN Connect the decoderMake connections HR-J670/671/672/673/674EU onlySelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 38 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled Broadcast44 EN Set Stations aSet Stations B Station Name TV Station And ID List46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program NumberAccess the Clock Set screen Clock Set48 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Timer warning display Tuner Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Language Manual Channel Set Manual Tracking Mode SetInternational Telephone Language Code Country CodeSee Instructions  pg
Related manuals
Manual 56 pages 18.54 Kb Manual 56 pages 11.98 Kb

HR-J673, HR-J472EU, HR-J674, HR-J470, HR-J671 specifications

The JVC HR series of VCRs, including the HR-J672, HR-J272EU, HR-J270, HR-J671, and HR-J470, showcases JVC's commitment to delivering high-quality video recording and playback solutions. Each model comes with unique features and technologies that cater to various user needs while maintaining the standards of performance and reliability for which JVC is known.

Starting with the HR-J672, this VCR is equipped with advanced features such as digital noise reduction, which effectively enhances the quality of playback by minimizing unwanted artifacts. Users can take advantage of its 6-head system, which provides better tracking and improved picture quality. The model's Auto Tracking feature ensures that recordings maintain optimal clarity, even through various playback speeds.

The HR-J272EU, another versatile model, focuses on ease of use without sacrificing quality. It offers a straightforward interface and simple programming functions, making it perfect for families and casual users. The VCR also supports a variety of recording formats, enabling flexible viewing options for different tape types, including EP (Extended Play) mode for longer recording times.

Moving on to the HR-J270, this model is recognized for its compact design and energy-efficient operation. It features JVC's Super VHS technology, providing enhanced resolution and sharper images compared to standard VHS. The integration of an intuitive on-screen menu allows users to easily access and navigate through functions for recording and playback.

The HR-J671 is particularly notable for its robust build and durability, making it a solid choice for frequent use. It includes features like a high-speed rewind option, reducing wait times when preparing tapes for re-watching. In addition, its compatibility with various input sources enables users to connect and record from external devices seamlessly.

Finally, the HR-J470 is designed as a budget-friendly solution without compromising essential functionalities. It incorporates basic editing features, allowing users the ability to insert and delete segments of recorded footage effortlessly. This model also prioritizes user comfort with a remote control, making it easy to operate from a distance.

In summary, the JVC HR series offers a range of VCR models, each tailored to different preferences and requirements. From advanced technologies to user-friendly designs, these VCRs remain valuable options for anyone looking to enjoy the nostalgic experience of videotape recording and playback. JVC has succeeded in blending performance with practicality, ensuring that their devices are suitable for both casual viewers and dedicated enthusiasts alike.
Top Page Image Contents