JVC HR-J672, HR-J673, HR-J470, HR-J472EU, HR-J671, HR-J272EU, HR-J270, HR-J674 Recording

Page 51

 

 

 

EN 51

RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Recording cannot be started.

There is no cassette loaded, or the

Insert a cassette, or using adhesive tape,

 

 

cassette loaded has had its record safety

reseal the slot where the tab was removed.

 

 

tab removed.

 

 

 

 

 

2.

TV broadcasts cannot be recorded.

“L-1”, “L-2” or “SAT” has been selected

Set to the desired channel.

 

 

as the input mode.

 

 

 

 

 

3.

Tape-to-tape editing is not possible.

The source (another video recorder,

Confirm that the source is properly

 

 

camcorder) has not been properly

connected.

 

 

connected.

 

 

 

All necessary power switches have not

Confirm that all units’ power switches are

 

 

been turned on.

turned on.

 

 

The input mode is not correct.

Set the input mode to “L-1”, “L-2” or

 

 

 

“SAT”.

 

 

 

 

4.

Camcorder recording is not possible.

The camcorder has not been properly

Confirm that the camcorder is properly

 

 

connected.

connected.

 

 

The input mode is not correct.

Set the input mode to “L-1”, “L-2” or

 

 

 

“SAT”.

 

 

 

TIMER RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Timer recording won’t work.

The clock and/or the timer have been set

Re-perform the clock and/or timer

 

 

incorrectly.

settings.

 

 

The timer is not engaged.

Press # and confirm that “#” is

 

 

 

displayed on the front display panel.

 

 

 

 

2.

Timer programming is not possible.

Timer recording is in progress.

Timer programming can’t be performed

 

 

 

while a timer recording is in progress.

 

 

 

Wait until it finishes.

 

 

 

 

3.

“#” and “[” on the front display

The timer is engaged but there’s no

Load a cassette with the record safety tab

 

panel won’t stop blinking.

cassette loaded.

intact, or cover the hole using adhesive

 

 

 

tape.

 

 

 

 

4.

The cassette is automatically ejected,

The loaded cassette has had its record

Remove the cassette and cover the hole

 

and “#” and “[” on the front

safety tab removed.

with adhesive tape, or insert a cassette

 

display panel won’t stop blinking.

 

with the record safety tab intact.

 

 

 

 

5.

“#” blinks for 10 seconds and the

# has been pressed when there are no

Check the programmed data and re-

 

Timer mode is disengaged.

programs in memory, or the timer

program as necessary, then press # again.

 

 

record information has been

 

 

 

programmed incorrectly.

 

 

 

 

 

6.

The cassette is automatically ejected,

The end of the tape was reached during

The programme may not have been

 

the power shuts off and “#” and

timer recording.

recorded in its entirety. Next time make

 

“[” won’t stop blinking.

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

 

 

7.

The SHOWVIEW system does not timer-

The recorder’s channel positions have

Refer to “Guide Program Number Set”

 

record properly.

been set incorrectly.

( pg. 47) and re-perform the procedure.

 

 

 

 

Image 51
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Press rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channelJust Clock Language for the on-screen display12 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller14 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 16 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed Search18 EN Manual TrackingInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory20 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherSet the counter display Reset the counter22 EN Tape Remaining TimeRecording Playback24 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users26 EN Express Timer ProgrammingPress PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position28 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify30 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme RecordingStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder 32 ENSatellite receiver Decoder Back of recorder Connecting To a Satellite ReceiverSet the tuner Select the input mode34 EN Connect the decoderMake connections HR-J670/671/672/673/674EU onlySelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 38 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled Broadcast44 EN Set Stations aSet Stations B Station Name TV Station And ID List46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program NumberAccess the Clock Set screen Clock Set48 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Timer warning display Tuner Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Language Manual Channel Set Manual Tracking Mode SetInternational Telephone Language Code Country CodeSee Instructions  pg
Related manuals
Manual 56 pages 18.54 Kb Manual 56 pages 11.98 Kb

HR-J673, HR-J472EU, HR-J674, HR-J470, HR-J671 specifications

The JVC HR series of VCRs, including the HR-J672, HR-J272EU, HR-J270, HR-J671, and HR-J470, showcases JVC's commitment to delivering high-quality video recording and playback solutions. Each model comes with unique features and technologies that cater to various user needs while maintaining the standards of performance and reliability for which JVC is known.

Starting with the HR-J672, this VCR is equipped with advanced features such as digital noise reduction, which effectively enhances the quality of playback by minimizing unwanted artifacts. Users can take advantage of its 6-head system, which provides better tracking and improved picture quality. The model's Auto Tracking feature ensures that recordings maintain optimal clarity, even through various playback speeds.

The HR-J272EU, another versatile model, focuses on ease of use without sacrificing quality. It offers a straightforward interface and simple programming functions, making it perfect for families and casual users. The VCR also supports a variety of recording formats, enabling flexible viewing options for different tape types, including EP (Extended Play) mode for longer recording times.

Moving on to the HR-J270, this model is recognized for its compact design and energy-efficient operation. It features JVC's Super VHS technology, providing enhanced resolution and sharper images compared to standard VHS. The integration of an intuitive on-screen menu allows users to easily access and navigate through functions for recording and playback.

The HR-J671 is particularly notable for its robust build and durability, making it a solid choice for frequent use. It includes features like a high-speed rewind option, reducing wait times when preparing tapes for re-watching. In addition, its compatibility with various input sources enables users to connect and record from external devices seamlessly.

Finally, the HR-J470 is designed as a budget-friendly solution without compromising essential functionalities. It incorporates basic editing features, allowing users the ability to insert and delete segments of recorded footage effortlessly. This model also prioritizes user comfort with a remote control, making it easy to operate from a distance.

In summary, the JVC HR series offers a range of VCR models, each tailored to different preferences and requirements. From advanced technologies to user-friendly designs, these VCRs remain valuable options for anyone looking to enjoy the nostalgic experience of videotape recording and playback. JVC has succeeded in blending performance with practicality, ensuring that their devices are suitable for both casual viewers and dedicated enthusiasts alike.