JVC HR-J270, HR-J673 46 EN, Access the Video Channel Set mode, Set the RF output system

Page 46

46 EN

SUBSIDIARY SETTINGS (cont.)

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.

If you have connected the recorder to your TV via the AV connection ( pg. 7), since you do not need the video channel you have to set the video channel to off.

If you have connected the recorder to your TV via the RF connection ( pg. 7), you have to set the correct video channel.

Before performing the following steps:

Make sure the recorder’s power is off and there is no cassette inserted in the recorder.

A Access the Video Channel Set mode.

Hold down 0 on the recorder until the front display panel shows the following.

B Set the RF output system.

The blinking number on the display indicates the RF output system of your country.

●If you have selected MAGYARORSZÁG (36), CESKÁ

REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting ( pg. 8, 12), press rt to set to “2”.

●For other countries, set to “1”. Then press OK. (1: B/G 2: D/K)

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the TV screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

D Exit the Video Channel Set mode.

Press OK on the remote control.

C Set the video channel.

With AV Connection

Press PR – until the front display panel shows “1OUT– –” (or “2OUT– –”).

●Now the video channel is set to off.

With AV Connection

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection

The channel on which the TV screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the video channel.

With RF Connection

Press PR + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Example) If channel 50 is available in your area

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTurn on the recorder Auto Set UpSelect your country Press rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download10 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 12 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 14 ENNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec Basic Playback 16 ENVariable Speed Search Slow MotionHigh-Speed Search Pause during playbackManual Tracking 18 ENInstant ReView Next Function Memory Index SearchSkip Search Repeat Playback20 EN Watching Another Instant Timer Recording ITREngage the ITR mode Set the recording durationTape Remaining Time Reset the counter22 EN Set the counter displayPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 24 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 26 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR +28 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode 30 ENEdit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorder32 EN Set the input mode of recording deckAnother Video Recorder Start the source playerConnecting To a Satellite Receiver Satellite receiver Decoder Back of recorderConnect the decoder Select the input mode34 EN Set the tunerHR-J670/671/672/673/674EU only Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is38 EN For ExampleAbout Ntsc Playback 40 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 42 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 44 ENSet Stations B TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 46 ENGuide Program Number Showview SetupGuide Program Number Set Enter the Guide Program numberClock Set Access the Clock Set screen48 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 50 ENRecording Other Problems 52 ENPlayback 54 EN Language Manual Channel Set Manual Tracking Mode Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Timer warning display Tuner SetCountry Code International Telephone Language CodeSee Instructions  pg
Related manuals
Manual 56 pages 18.54 Kb Manual 56 pages 11.98 Kb

HR-J673, HR-J472EU, HR-J674, HR-J470, HR-J671 specifications

The JVC HR series of VCRs, including the HR-J672, HR-J272EU, HR-J270, HR-J671, and HR-J470, showcases JVC's commitment to delivering high-quality video recording and playback solutions. Each model comes with unique features and technologies that cater to various user needs while maintaining the standards of performance and reliability for which JVC is known.

Starting with the HR-J672, this VCR is equipped with advanced features such as digital noise reduction, which effectively enhances the quality of playback by minimizing unwanted artifacts. Users can take advantage of its 6-head system, which provides better tracking and improved picture quality. The model's Auto Tracking feature ensures that recordings maintain optimal clarity, even through various playback speeds.

The HR-J272EU, another versatile model, focuses on ease of use without sacrificing quality. It offers a straightforward interface and simple programming functions, making it perfect for families and casual users. The VCR also supports a variety of recording formats, enabling flexible viewing options for different tape types, including EP (Extended Play) mode for longer recording times.

Moving on to the HR-J270, this model is recognized for its compact design and energy-efficient operation. It features JVC's Super VHS technology, providing enhanced resolution and sharper images compared to standard VHS. The integration of an intuitive on-screen menu allows users to easily access and navigate through functions for recording and playback.

The HR-J671 is particularly notable for its robust build and durability, making it a solid choice for frequent use. It includes features like a high-speed rewind option, reducing wait times when preparing tapes for re-watching. In addition, its compatibility with various input sources enables users to connect and record from external devices seamlessly.

Finally, the HR-J470 is designed as a budget-friendly solution without compromising essential functionalities. It incorporates basic editing features, allowing users the ability to insert and delete segments of recorded footage effortlessly. This model also prioritizes user comfort with a remote control, making it easy to operate from a distance.

In summary, the JVC HR series offers a range of VCR models, each tailored to different preferences and requirements. From advanced technologies to user-friendly designs, these VCRs remain valuable options for anyone looking to enjoy the nostalgic experience of videotape recording and playback. JVC has succeeded in blending performance with practicality, ensuring that their devices are suitable for both casual viewers and dedicated enthusiasts alike.
Top Page Image Contents