JVC HR-J695EK, HR-J696EK manual Recording

Page 56

56

subsidiary information

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

RECORDING

1.Recording cannot be started.

2.TV broadcasts cannot be recorded.

3.Tape-to-tape editing is not possible.

4.Camcorder recording is not possible.

•There is no cassette loaded, or the cassette loaded has had its record safety tab removed.

•L-1 or L-2 has been selected as the input mode.

•The source (another VCR, camcorder) has not been properly connected.

•All necessary power switches have not been turned on.

•The input mode is not correct.

•The camcorder has not been properly connected.

•The input mode is not correct.

Insert a cassette, or using adhesive tape, cover the hole where the tab was removed.

Set to the desired preset.

Confirm that the source is prop- erly connected.

Confirm that all units’ power switches are turned on.

Set the input mode to L-1 or L-2.

Confirm that the camcorder is properly connected.

Set the input mode to L-1 or L-2.

TIMER RECORDING

1.Timer recording won’t work.

2.Timer programming is not possible.

•The clock and/or the timer have been set incorrectly.

•The timer is not engaged.

•Timer recording is in progress.

Re-perform the clock and/or timer settings.

Press cand confirm that cis displayed on the display panel.

Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.

3.con the display panel won’t stop blinking.

4.c, Uand ,on the display panel won’t stop blinking.

•The timer is engaged but there’s no cassette loaded.

•The loaded cassette has had its record safety tab removed.

•The end of the tape was reached during timer recording.

Load a cassette with the record safety tab intact.

Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact.

The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

5.cblinks for 10 seconds and the Timer mode is disengaged.

•chas been pressed when there are no programs in memory, or the timer record information has been pro- grammed incorrectly.

Check the programmed data and re-programme as necessary, then press cagain.

6.The VIDEO Plus+ system does not timer record properly.

•The VCR’s preset positions have been set incorrectly.

Refer to Guide Program Numbers (☞ pg. 53) and re-perform the procedure.

Page 55 Page 57
Image 56
Page 55 Page 57
Contents HR-J695EK HR-J696EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Front panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup pg Auto Setup Three-Step Quick StartPreset Download Check the Results Finish OffGo straight to 2000 used as example only Perform Clock Set on Go to StepBasic Features Playback Load a Video CassettePlay Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardSingle Frame Movement Playback FeaturesPause During Playback High Speed Search Slow MotionVariable Speed Search Recording Choose a ProgrammeSet the Tape Speed Start RecordingChange Display Information Resetting the CounterDisplay Tape Remaining Time Instant Timer Recording Recording Resume FunctionPress p. You will see the following TV screen information Get to the Video Plus + ScreenEnter the PlusCode Number Return to Normal Screen Engage Timer Mode Enter Programme Details Express Timer ProgrammingGet to the Programme Screen AUX Times as necessary Check, Cancel & Change ProgrammesPress c, then press oto disengage the timer mode Advanced Features Picture Control Picture QualityManual Tracking Recording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayB.E.S.T Picture System Turning B.E.S.T. on or OFFSoundtrack Selection Sound ModesNicam Stereo and Bilingual Broadcasts Finding Specific Scenes Skip SearchIndex Search Instant ReViewTV Auto Power On You can use your TV’s Remote Control to turn off the VCRLink Functions NexTView LinkRecording on Direct RecButtons. Press Or E to select on or Satellite Receiver Control Settings Installing Satellite ControllerSetting satellite receiver’s brand SET using the Aand Bbuttons. Press Or EAppropriate number keys to enter the brand ModePress the Aand Bbuttons to move Or E to finish the Sat Control Set modeCheck Result of Test Auto Satellite Auto Record from Satellite ReceiverAdvanced features Editing Using Another VCR EditingEditing from a Camcorder Start recorder Press TOther Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerAuto Timer Auto Power Off/3HRepeat Playback Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorAccess Video Channel Mode Exit Video Channel Set ModeVideo Channel Set Set Video ChannelAuto Channel Setup SET using the Aand Bbuttons and press Or E twiceTuner Set Perform auto channel set Move the highlight bar to Auto CHManual Channel Setup Button on the Remote Control to move the highlight barPress Or E Confir- onwards asTo the preset position you want then press Change Station NameDelete a Channel Confirmation screen appearsChange Station Preset Position Button on the Remote Control until the item you want toButton to move the station to the new preset position Then pressFine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Or E. Set the correct year Setting the ClockOr E. The date Manually Setting Guide Program Numbers Guide Program NumbersUand cremain lit on the display panel. Is there a problem? Question and AnswersCan the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo HR-J695/696EK
Top Page Image Contents