JVC HR-J768MS, HR-J767MS, HR-J667MS Recording, Playback, Or press Record on the recorder

Page 21

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

DURING B.E.S.T.

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP (or EP) modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording

(☞ pg. 18).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set "B.E.S.T." to "OFF" in step 4 on page 20.

EN21

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. "BEST" appears blinking on the recorder's display panel.

NOTES:

●When watching a tape recorded with "B.E.S.T." set to "ON", it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 20.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents HR-J768MS HR-J767MS HR-J667MS Safety Precautions Auto Head CleanerDo not place the recorder Connections BasicVideo Channel Set Access Video Channel SET ModeSelect TV System EN I Nitial Sett IngsFinish Video Channel SET SET Video ChannelFinish Video Channel SETSelect Language Auto Set UpSET Time SET DateStart Auto Channel SET During Auto Set UpMajor Countries TV System Press OK or Push JOG ÞENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderSelect Language Access Initial SET ScreenPress Clock SetPress Menu Press Push JOG %Þto place the pointer next toLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate SLOW-MOTION PlaybackOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Instant ReviewSkip Over Unwanted Activate Index SearchSections EN PlaybackSET Mode Access Main Nenu ScreenTape Position Indicator Picture ControlSoundtrack Selection Basic Recording Recording Features To Record Stereo Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesTo Record Nicam Stereo Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedPreparation S.T. Picture SystemRecording PlaybackOr press Record on the recorder Access Initial SET Screen CODESetupAccess G-CODE Showview Setup Screen EN Timer RecordingEnter Receiving Channel Position Number Number keys to input Number of the recordersReceived. Then press OK or CODETimer Programming Before performing G-CODETimer ProgrammingEnter G-CODE Number Timer Mode Return to NormalEngage Recorders Programming Express TimerEnter Programme Stop Time Enter Programme DateOr OK. Program Completed appears on Screen for about 5 seconds, then normal screenRepeat steps 1 7 for each additional programme Cancel or Replace a Programme Disengage Timer ModeReturn to Timer Mode Check, Cancel And Replace ProgrammesAuto Timer Auto SP→LP TimerRemove Power Supply Remote Control FunctionsSET Remote Control Code RE-SUPPLY PowerTV Multi-brand Remote Control SET TV Brand CodeOperate TV Control SET Mode SET Recording Decks Input ModeEdit To Or From Another Video Recorder Make ConnectionsSelect Edit for Picture Control SET Mode SET Recorders Input ModeEdit From a Camcorder Start CamcorderMode Display Setting Of The Colour System Select ButtonsMode Description Off-Air RecordingRecorded tape HR-J768MS/HR-J767MS/HR-J667MS Tape-To-Tape EditingAccess Tuner SET Tuner SETAuto Channel Set Select Position Access Channel ListSET Desired Station Manual Channel SetEN Tuner SET Delete a ChannelSwap Channel Positions Fine-Tuning Channels If youre using the RF OUT connec- tion EN TroubleshootingPress Play to turn the indicator off Check the cassette Try manual tracking. pgProperly Have been set incorrectly Procedure. pg Timer againNew one. pg OubleshootingPlayback Recording Questions and Answer S E NFront View IndexDisplay Panel Remote Control Specification S HR-J667MS

HR-J768MS, HR-J667MS, HR-J767MS specifications

The JVC HR-J767MS, HR-J667MS, and HR-J768MS are standout VCR models released by JVC in the late 1990s, showcasing the company’s commitment to high-quality video recording technology. These machines are part of JVC's HR series, noted for their durability and operations tailored to meet consumer demands during the peak of VCR usage.

One of the main features across these models is their superior video quality, enabled by JVC’s advanced Super VHS (S-VHS) technology. This feature significantly enhances the resolution of recordings compared to standard VHS, delivering sharper images and improved color quality. The HR-J768MS, in particular, is celebrated for its high-fidelity audio performance, supporting stereo sound that elevates the overall viewing experience.

Another notable technology utilized in these models is the Digital Tracking system. This innovative feature ensures that the video head aligns accurately with the tape, resulting in minimal distortion and enhanced playback quality. Furthermore, the models are equipped with features like Auto Sensing, which detects the type of tape in use and adjusts recording settings automatically, allowing for seamless user experiences.

The HR-J767MS and HR-J667MS incorporate a robust time base corrector. This technology stabilizes the video signal during playback and recording, minimizing jitter and enhancing picture stability. Users appreciate this feature for its significant impact on the quality of home recordings, particularly when capturing live events or personal memories.

In terms of convenience, these models come with programmable timers and an intuitive user interface, making it easy for users to schedule recordings effortlessly. The built-in Video Plus+ feature simplifies the process further by allowing viewers to record programs with just a few button presses.

Connectivity options are also a highlight, as these VCRs support both composite and S-Video outputs, catering to various home theater setups. Additionally, the HR-J768MS includes a front AV input for quick access, making it user-friendly for attaching camcorders or gaming consoles.

Overall, the JVC HR-J767MS, HR-J667MS, and HR-J768MS exemplify the technological advancements made in VCR design during their time. Their combination of quality, ease of use, and innovative features made them popular choices for consumers looking to capture and cherish their memories on tape. Despite the rise of digital media, these models remain cherished collectibles for enthusiasts of vintage video technology.
Top Page Image Contents