JVC HR-J667MS Express Timer, Programming, Enter Programme Stop Time, Enter Programme Date

26ENTIMERRECORDING(cont.)

Express Timer

ACCESS TIMER PROGRAMMING SCREEN

Programming

Remember, the clock must be set before you can programme the timer (☞ pg. 10).

1

HR-J768MS

Press PROG to access the "G-CODE/SHOWVIEW" screen, then press START +/– (If you're just starting out, "P1" appears).

HR-J767MS/

HR-J667MS

– P1 –	STOP
START
–:– – =	–:– –
	SP
DATE	TV PROG
– –.– –	– –
[+/–] =
[PROG] : EXIT

Before performing the following steps:

● Insert a cassette with the safety tab in place. The recorder

will come on automatically.

● Turn on the TV and select theVIDEO channel (or AV mode).

● Select the appropriate colour system by pressing the

Press PROG (If you're just starting out, "P1" appears).

ENTER PROGRAMME START TIME

COLOUR SYSTEM button (☞ pg. 34).

2

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to move in 30- minute increments, or press and release repeatedly to move 1 minute at a time.

START	– P1 –	STOP
	=
21:00		–:– –
		SP
DATE		TV PROG
– –.– –		– –
[+/–] =
[PROG] : EXIT

COLOUR SYSTEM

1	2	3
		2
4	5	6
7	8	9
TOP+/	0	4
–

TV PROG+/–

START+/–

PROG	1	DATE+/
		–

3

4

5

ENTER PROGRAMME STOP TIME

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

ENTER PROGRAMME DATE

Press DATE +/–. (The current date appears on screen. The date you enter appears in its place.)

ENTER CHANNEL

POSITION

Press TV PROG +/–.	– P1 –
START	STOP
21:00	= 22:00
	SP
DATE	TV PROG
25.12	1
[+/–] =
[PROG] : EXIT

3