JVC HR-J667MS, HR-J768MS SET Video Channel, Finish Video Channel SET, Set, With AV Connection

Page 5

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 4), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

●If Auto Set Up (☞ pg. 6) or Tuner Set (☞ pg. 36) has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

EN5

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

 

Hold down STOP/EJECT on the recorder until the

1

display panel shows the following.

 

 

 

 

 

 

 

 

 

 

 

SET VIDEO CHANNEL

 

Press OK, then press TV PROG – until the display panel

2

shows the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Now the video channel is set to off (– –).

 

 

 

 

 

 

 

FINISH VIDEO CHANNEL

3

SET

Press OK.

 

 

 

 

 

● If Auto Set Up (☞ pg. 6) or Tuner Set (☞ pg. 36) has

 

 

not previously been performed, the Language Select

 

 

 

screen appears and Auto Set Up function takes place

 

 

 

automatically.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the VCR power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HR-J768MS HR-J767MS HR-J667MS Do not place the recorder Safety PrecautionsAuto Head Cleaner Connections BasicVideo Channel Set Access Video Channel SET ModeSelect TV System EN I Nitial Sett IngsFinish Video Channel SET SET Video ChannelFinish Video Channel SETSelect Language Auto Set UpSET Time SET DateStart Auto Channel SET During Auto Set UpMajor Countries TV System Press OK or Push JOG ÞENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Turn on the RecorderSelect Language Access Initial SET ScreenPress Clock SetPress Menu Press Push JOG %Þto place the pointer next toLoad a Cassette Basic PlaybackPoint Start PlaybackSearch Playback FeaturesPlayback Activate SLOW-MOTION PlaybackOverride Automatic Tracking Adjust Tracking ManuallyReturn to Automatic Tracking Activate Instant ReviewSkip Over Unwanted Activate Index SearchSections EN PlaybackSET Mode Access Main Nenu ScreenTape Position Indicator Picture ControlSoundtrack Selection Basic Recording Recording Features To Record Stereo Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesTo Record Nicam Stereo Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedPreparation S.T. Picture SystemOr press Record on the recorder RecordingPlayback Access Initial SET Screen CODESetupAccess G-CODE Showview Setup Screen EN Timer RecordingReceived. Then press OK or Enter Receiving Channel Position NumberNumber keys to input Number of the recorders Enter G-CODE Number CODETimer ProgrammingBefore performing G-CODETimer Programming Engage Recorders Timer ModeReturn to Normal Programming Express TimerEnter Programme Stop Time Enter Programme DateRepeat steps 1 7 for each additional programme Or OK. Program Completed appears onScreen for about 5 seconds, then normal screen Cancel or Replace a Programme Disengage Timer ModeReturn to Timer Mode Check, Cancel And Replace ProgrammesAuto Timer Auto SP→LP TimerRemove Power Supply Remote Control FunctionsSET Remote Control Code RE-SUPPLY PowerOperate TV TV Multi-brand Remote ControlSET TV Brand Code Control SET Mode SET Recording Decks Input ModeEdit To Or From Another Video Recorder Make ConnectionsSelect Edit for Picture Control SET Mode SET Recorders Input ModeEdit From a Camcorder Start CamcorderMode Display Setting Of The Colour System Select ButtonsMode Description Off-Air RecordingRecorded tape HR-J768MS/HR-J767MS/HR-J667MS Tape-To-Tape EditingAuto Channel Set Access Tuner SETTuner SET Select Position Access Channel ListSET Desired Station Manual Channel SetSwap Channel Positions EN Tuner SETDelete a Channel Fine-Tuning Channels If youre using the RF OUT connec- tion EN TroubleshootingPress Play to turn the indicator off Check the cassette Try manual tracking. pgProperly Have been set incorrectly Procedure. pg Timer againNew one. pg OubleshootingPlayback Recording Questions and Answer S E NFront View IndexDisplay Panel Remote Control Specification S HR-J667MS

HR-J768MS, HR-J667MS, HR-J767MS specifications

The JVC HR-J767MS, HR-J667MS, and HR-J768MS are standout VCR models released by JVC in the late 1990s, showcasing the company’s commitment to high-quality video recording technology. These machines are part of JVC's HR series, noted for their durability and operations tailored to meet consumer demands during the peak of VCR usage.

One of the main features across these models is their superior video quality, enabled by JVC’s advanced Super VHS (S-VHS) technology. This feature significantly enhances the resolution of recordings compared to standard VHS, delivering sharper images and improved color quality. The HR-J768MS, in particular, is celebrated for its high-fidelity audio performance, supporting stereo sound that elevates the overall viewing experience.

Another notable technology utilized in these models is the Digital Tracking system. This innovative feature ensures that the video head aligns accurately with the tape, resulting in minimal distortion and enhanced playback quality. Furthermore, the models are equipped with features like Auto Sensing, which detects the type of tape in use and adjusts recording settings automatically, allowing for seamless user experiences.

The HR-J767MS and HR-J667MS incorporate a robust time base corrector. This technology stabilizes the video signal during playback and recording, minimizing jitter and enhancing picture stability. Users appreciate this feature for its significant impact on the quality of home recordings, particularly when capturing live events or personal memories.

In terms of convenience, these models come with programmable timers and an intuitive user interface, making it easy for users to schedule recordings effortlessly. The built-in Video Plus+ feature simplifies the process further by allowing viewers to record programs with just a few button presses.

Connectivity options are also a highlight, as these VCRs support both composite and S-Video outputs, catering to various home theater setups. Additionally, the HR-J768MS includes a front AV input for quick access, making it user-friendly for attaching camcorders or gaming consoles.

Overall, the JVC HR-J767MS, HR-J667MS, and HR-J768MS exemplify the technological advancements made in VCR design during their time. Their combination of quality, ease of use, and innovative features made them popular choices for consumers looking to capture and cherish their memories on tape. Despite the rise of digital media, these models remain cherished collectibles for enthusiasts of vintage video technology.
Top Page Image Contents