Audio Dubbing
(HR-S4600U Only)
PAUSE | PLAY |
JOG
SHATTLE
A.DUB
Audio cable
Audio component
(CD player etc.)
NOTES:
When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the
Audio dubbing stops automatically when the counter reaches "0:00:00", and the VCR enters the Play mode. Check the counter reading before dubbing.
Audio dubbing is also possible using the rear AUDIO IN connectors.
Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.
When playing back an
Picture may be distorted during Audio Dubbing Pause. It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
EN51
Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Use your VCR as the recorder.
Normal audio track
| MAKE CONNECTIONS |
| Connect an audio component to your VCR's AUDIO IN |
| L+ R connectors. *When connecting monaural |
1 equipment, use only the VCR's AUDIO IN L connector. | |
| SET RECORDER’S INPUT |
| MODE |
| Set to "AUX". Press the NUMBER key “0” and/or CH to |
| select depending on the connector being used – |
2 for the rear AUDIO/VIDEO IN connector, or | |
| the front AUDIO/VIDEO IN connector. |
| LOCATE START POINT |
| Press PLAY to start playback of the tape in your VCR, |
| and press PAUSE when you find the point where you |
3 want to start dubbing. | |
4 | ENGAGE AUDIO DUBBING |
Press A.DUB. | |
| |
Your VCR enters the Audio Dubbing Pause mode. | |
(" " blinks, " " and " " light up on the front | |
| display panel.) |
|
|
| START DUBBING |
| Engage the audio component's Play mode, then press |
| PLAY to start the tape in your VCR. Audio dubbing |
5 begins at this point. |
" " blinks and " " is displayed on the front display panel.
To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.
END AUDIO DUBBING
6 Press STOP to stop the tape in your VCR, and engage the audio component's Stop mode.