JVC HR-S3901, HR-3911U specifications Editing

Editing

You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.

AMake connections

Example 1: When another VCR is VHS VCR

Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR

Audio cable (not supplied)

To audio output

S-video cable (supplied)

To S-video output

Another VCR

●If another VCR is monaural, connect this VCR’s AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR.

Example 2: When another VCR is S-VHS VCR equipped with S- VIDEO input connector and when using this VCR as the playback

VCR

Another VCR (for recording)

Another VCR (for playback)

BLoad cassettes

Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.

CSelect input mode on recording VCR

Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR);

Select “L-1” — when connecting the other VCR to the audio/video

input connectors on the rear panel.

Select “F-1” — when connecting the other VCR to the audio/video

input connectors on the front panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then turn it to the left or right.

DSelect video input connector on recording VCR

When using this VCR as the recording VCR, select the appropriate mode depending on the connector being used ( pg. 16). When using S-VIDEO IN connector on the rear panel, set “REAR AUX INPUT” to “S-VIDEO”.

When using VIDEO IN connector on the rear panel, set “REAR AUX INPUT” to “VIDEO”.

ESelect edit mode

Set the edit mode to “ON” for the VCRs if such a mode is equipped.

●On this VCR, set “PICTURE CONTROL” to “EDIT” ( pg. 15).

FStart playback

Press PLAY (4) on the playback VCR.

GStart recording

Press REC (7) on the recording VCR.

Various connection for editing tapes

The following three methods can be used for editing tapes.

●VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●S-VHS to VHS editing (VIDEO-VIDEO connection):

Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●S-VHS to S-VHS (S-VIDEO connection):

Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.