JVC HR-S5600AM specifications SET Video Channel, Finish Video Channel SET, Set

Page 7

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 6), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

●If Auto Set Up (☞ pg. 8) or Tuner Set (☞ pg. 42) has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

EN7

With AV Connection or

S-VIDEO Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

 

 

Hold down STOP/EJECT on the recorder until the

1 display panel shows the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET VIDEO CHANNEL

 

 

Press OK, then press TV PROG – until the display panel

2

shows the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Now the video channel is set to off (– –).

 

 

 

 

 

 

 

 

 

FINISH VIDEO CHANNEL

3

 

SET

 

Press OK.

 

 

 

 

 

 

● If Auto Set Up (☞ pg. 8) or Tuner Set (☞ pg. 42) has

 

 

not previously been performed, the Language Select

 

 

 

screen appears and Auto Set Up function takes place

 

 

 

automatically.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet

and turn off the recorder power.

2Open the battery cover while pressing the release tab as

illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out

the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HR-S5600AM Safety Precautions Moisture Condensation Mains Check ContentsBasic Connections Situate RecorderBack of Recorder Video ConnectionConnect Recorder to TV Connect Recorder to MainsSelect TV System Access Video Channel SET ModeEN Initial Settings Video Channel SetSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Date Auto Set UpSelect Language SET TimePress OK or Push JOG Þ During Auto Set UpStart Auto Channel SET Major Countries TV SystemTurn on the Recorder Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysSelect Language Access Initial SET ScreenStart Clock Operation Access Clock SET ScreenClock Set SET TimeStart Playback Basic PlaybackLoad a Cassette PointSlow Motion Playback FeaturesActivate HIGH-SPEED Search High-Speed SearchReturn to Automatic Tracking Adjust Tracking ManuallyActivate Index Search Override Automatic TrackingEN Playback Activate Instant ReviewSkip Over Unwanted SectionsBasic Recording EN Recording Recording FeaturesSelect Channel to Watch SET Counter DisplaySET Recording Duration Engage ITR ModeSelect S-VHS Mode Access Function SET ScreenVHS Super VHS, S-VHS ET and VHS Super VHS ET Select S-VHS ET SET ModeEngage S-VHS ET Mode Press S-VHS ET. Current setting appears on Screen for aboutPreparation Access Main Menu ScreenS.T. Picture System Return to Normal ScreenPlayback RecordingOr press Record on the recorder Number System SetupAccess G-CODE SET-UP EN Timer RecordingOr Push JOG% Enter Receiving Channel Position NumberNumber keys to input Number of the recorders Received. Then press OKEnter G-CODE Number CODETimer ProgrammingAccess G-CODE Screen Access G-CODE Programme ScreenReturn to Normal Timer ModeEngage Recorders Start Time Express Timer ProgrammingScreen for about 5 seconds, then normal screen Or OK. Program Completed appears onReturn to Timer Mode Disengage Timer ModeAccess Programme Access Programme ScreenAuto Timer Auto SP→LP TimerRE-SUPPLY Power Remote Control FunctionsRemove Power Supply SET Remote Control CodeSET TV Brand Code TV Multi-brand Remote ControlOperate TV Rear View Connecting Using a Stereo SystemMake Connections EN System ConnectionsEditin G Select Edit ModeEditing Mode Setting Preparation For EditingEditing Edit From CamcorderPlayer Start Source Player SET Recording Decks Input ModeSET Edit Mode Edit To Or From Another Video RecorderEngage Audio Dubbing SET Input ModeAudio Dubbing Locate Start PointEND Audio Dubbing Start DubbingOff-Air Recording Setting Of The Colour System Select ButtonsMode Display Mode DescriptionDubbed tape Tape-To-Tape EditingRecorded tape Playback equipmentTuner SET Access Tuner SETSelect Auto CH SET ModeSET Desired Station Access Tuner SETAccess Channel List Select PositionSwap Channel Positions Access Channel ListEN Tuner SET Delete a ChannelFINE-TUNE Fine-Tuning ChannelsTry manual tracking. pg EN TroubleshootingIf youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteRecording Timer againNew one. pg RoubleshootingQuest Ions and Answers Playback Timer RecordingFront View IndexRear View EN Index Remote ControlSpeci Fications EN Supplied fresh battery actualMaximum recording time Memo Memo HR-S5600AM
Top Page Image Contents