JVC HR-S5990AM, HR-S5900AM specifications SET Video Channel, Finish Video Channel SET, Set

Page 7

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration ( "TEST SIGNAL" on page 6), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then PR +/– to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

●If Auto Set Up ( pg. 8) or Tuner Set ( pg. 54) has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

EN7

With AV Connection or

S-VIDEO Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

 

 

Hold down STOP/EJECT on the recorder until the

1 display panel shows the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET VIDEO CHANNEL

 

 

Press OK, then press PR – until the display panel shows

2

the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Now the video channel is set to off (– –).

 

 

 

 

 

 

 

 

 

FINISH VIDEO CHANNEL

3

 

SET

 

Press OK.

 

 

 

 

 

 

● If Auto Set Up ( pg. 8) or Tuner Set ( pg. 54)

 

 

has not previously been performed, the Language

 

 

 

Select screen appears and Auto Set Up function

 

 

 

takes place automatically.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

(MONO)

1Installing/Removing the lithium battery

Make sure that the power plug is connected to an AC outlet

2and turn off the recorder power.

Open the battery cover while pressing the release tab as

3illustrated.

Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out

4the lithium battery.

Close the battery cover until it clicks in place.

A

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HR-S5900AM HR-S5990AM Safety Precautions An environment where strong magnetic fields are generated An environment prone to extreme temperatures or humidityConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderBack of Recorder Video ConnectionConnect Recorder to TV Back of TVSelect TV System Access Video Channel SET ModeEN Initial Settings Video Channel SetSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Date Auto Set UpSelect Language SET TimeIran, Saudi Arabia, Egypt, Morocco During Auto Set UpStart Auto Channel SET Australia, New Zealand, Kuwait, U.A.EOn-Screen Displays Access Main Menu ScreenENABLE/DISABLE Initial SettingsSelect Language Access Initial SET ScreenOK or Push JOG # Place the pointer next to Access Clock SET ScreenClock Set Start Clock OperationStart Playback Basic PlaybackLoad a Cassette PointActivate FRAME-BY Frame Playback Playback FeaturesActivate HIGH-SPEED SearchIndex Search Activate Index SearchSlow Motion Variable-Speed SearchManually Adjust TrackingOverride Automatic TrackingPlayback Access Main Menu ScreenSET Mode Activate RepeatSections Skip Over UnwantedActivate Instant Review Basic Recording SET Counter Display Recording FeaturesReset Counter Select Channel to WatchSET Recording Duration Engage ITR ModeDisplay Remaining Time VHS Super VHS, S-VHS ET and VHS Select S-VHS ModePush JOG Then press OK Access Main MenuReturn to Normal Super VHS ETPreparation S.T. Picture SystemDuring B.E.S.T RecordingPlayback Or press Record on the recorderNumber System SetupAccess G-CODE Showview Setup Screen EN Timer RecordingReceived. Then press OK Enter Receiving Channel Position NumberReturn to Normal Screen Number keys to input Number of the recordersAccess G-CODE Programme Screen Timer ProgrammingEnter G-CODE Number Engage Recorders Timer Mode Access Title Edit ScreenEnter Programme Date Express Timer ProgrammingAccess G-CODE Screen Enter Programme Stop TimeReturn to Normal SET Programme Stop Time 24H Express Timer ProgrammingAccess 24HR Express Timer Programme Display SET Programme Start TimePress 24H Express ‰ SET Channel PositionAccess Programme Screen Access ProgrammeDATE+/ SP/LP/EP Cancel or Change Programme SettingWhen programmes overlap each other Confirm Overlapping ProgrammesAuto SP→ LP Timer Access Function SET ScreenTimer Recording Auto SP→ LP Timer Auto TimerAutomatic Sat- ellite Program Recording IndicatorBefore performing the following steps Navigation Screen Access Main MenuNavigation Load a Recorded CassetteScreen Navigation ModeTurn Off Navigation Programme NavigationPress the Number key Title Edit screen Appears Edit Programme TitlePlace the pointer next to Programme you want To editDelete Tape Data Entering CharacterNumber KEY Character Remote A/B Code Switching Remote Control FunctionsSET Remote Control Code for Remote EN Special FeaturesSET TV Brand Code TV Multi-brand Remote ControlControl Your TV Using Additional Buttons Turn on TVSET Brand Code Special FeaturesMulti-brand Remote Control Turn on UnitDVD Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code Cable BOX Brand Name CodeAudio Cable not provided Speaker Mains outlet Connecting Using a Stereo SystemMake Connections AUX in or Tape Monitor SpeakerAdvantages Of S-VHS Video Recorders Access Main Nenu ScreenPreparation For Editing EditingPlayer Edit From CamcorderStart Recording Deck SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Source PlayerAudio OUT SET Input ModeAudio Dubbing Engage Audio DubbingEND Audio Dubbing Start DubbingNtsc Recording Playback PAL/MESECAM Recording and PlaybackOff-Air Recording Playback equipment Tape-To-Tape EditingDubbed tape Tuner SET Access Tuner SETSelect Auto CH SET ModeSET Desired Station Access Tuner SETAccess Channel List Select PositionSwap Channel Positions Access Channel ListEN Tuner SET Delete a ChannelFINE-TUNE Fine-Tuning ChannelsIf youre using the RF OUT connec- tion EN TroubleshootingPress Play to turn the indicator off Check the cassette Recording New one.  pg RoubleshootingNo, it is normal Questions and Answers#STOP/EJECT Button  pg 567456 12Mains Power Cord  pgQFast Forward FF Button  pg EN IndexSpecifications EN Memo Memo HR-S5900/S5990AM
Top Page Image Contents