JVC HR-S5956EK, HR-S5955EK manual Input Setting, For L-2 Input

36

advanced features

L-2 INPUT Setting

The L-2 IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-2 INPUT to the appropriate mode depending on the output signals of the connected unit.

get to the output/input set screen Press m. Move the highlight bar to

OUTPUT/INPUT SET using the Aand Bbuttons and press 3 OK / (or E).

select mode Move the highlight bar to L-2 INPUT using the Aand B

buttons. Press 3 OK / (or E) to select the desired mode:

FOR L-2 INPUT

•VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.

•S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

	OUTPUT/INPUT SET
L-1	OUTPUT	VIDEO
L-2	INPUT	VIDEO

[1] a k [MENU]: EXIT

return to normal screen Press m.