JVC HR-S5955EK, HR-S5956EK manual Recording

Page 55

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

RECORDING

1.Recording cannot be started.

2.TV broadcasts cannot be recorded.

3.Tape-to-tape editing is not possible.

4.Camcorder recording is not possible.

•There is no cassette loaded, or the cassette loaded has had its record safety tab removed.

•L-1, L-2 or F-1 has been selected as the input mode.

•The source (another VCR, camcorder) has not been properly connected.

•All necessary power switches have not been turned on.

•The input mode is not correct.

•The camcorder has not been properly connected.

•The input mode is not correct.

Insert a cassette, or using adhesive tape, cover the hole where the tab was removed.

Set to the desired preset.

Confirm that the source is prop- erly connected.

Confirm that all units’ power switches are turned on.

Set the input mode to L-1, L-2 or F1.

Confirm that the camcorder is properly connected.

Set the input mode to L-1, L-2 or F1.

TIMER RECORDING

1.Timer recording won’t work.

2.Timer programming is not possible.

•The clock and/or the timer have been set incorrectly.

•The timer is not engaged.

•Timer recording is in progress.

Re-perform the clock and/or timer

settings.

Press cand confirm that cis displayed on the display panel.

Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.

3.con the display panel won’t stop blinking.

4.c, Uand ,on the display panel won’t stop blinking.

•The timer is engaged but there’s no cassette loaded.

•The loaded cassette has had its record safety tab removed.

•The end of the tape was reached during timer recording.

Load a cassette with the record safety tab intact.

Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact.

The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

5. cblinks for 10 seconds and the

• chas been pressed when

Timer mode is disengaged.

there are no programs in

 

memory, or the timer record

 

information has been pro-

 

grammed incorrectly.

6. The VIDEO Plus+ system does

• The VCR’s preset positions

not timer record properly.

have been set incorrectly.

Check the programmed data and re-programme as necessary, then press cagain.

Refer to Guide Program Numbers (☞ pg. 52) and re-perform the procedure.

Page 54 Page 56
Image 55
Page 54 Page 56
Contents HR-S5955EK HR-S5956EK Blue to N Neutral or Black Brown to L Live or Red Safety PrecautionsMoisture Condensation On The Safe Use Of Equipment Some Do’s And Don’tsContents Rear panel Front Panel Diagram KeyGetting Everything Ready Welcome to JVCScart and rf Press Auto SetupThree-Step Quick Start To connect the VCR to the TV with both the RFPerform Clock Set on Go to Step Check the ResultsFinish Off Go straight to 2000 used as example onlyThree-step quick start Basic Features Stop & Eject PlaybackLoad a Video Cassette PlayRewind and Fast Forward Video Heads CleaningPause During Playback Playback FeaturesSingle Frame Movement Variable Speed Search Slow MotionHigh Speed Search Start Recording RecordingChoose a Programme Set the Tape SpeedDisplay Tape Remaining Time Resetting the CounterChange Display Information Recording Resume Function Instant Timer RecordingEnter the PlusCode Number Get to the Video Plus + ScreenPress p. You will see the following TV screen information Return to Normal Screen Engage Timer Mode Get to the Programme Screen Express Timer ProgrammingEnter Programme Details AUX Press c, then press oto disengage the timer mode Check, Cancel & Change ProgrammesTimes as necessary Advanced Features Or E to set to on Picture QualityManual Tracking Video StabilizerPicture Control Super VHS ET S-VHS ET Tape TypeYour VCR can record in S-VHS, S-VHS ET or VHS Super VHS S-VHS, S-VHS ET and VHSSee ‘Super VHS ET S-VHS ET’ on Avoiding B.E.S.T. Time Delay Recording and Playback Using B.E.S.TTurning B.E.S.T. on or OFF Nicam Stereo and Bilingual Broadcasts Sound ModesSoundtrack Selection Instant ReView Finding Specific ScenesSkip Search Index SearchEditing Output SettingFor L-2 Input Input SettingEditing Using Another VCR Your VCR as the Player Editing from a Camcorder On-Screen Display O.S.D Other FunctionsAuto SP aLP Timer Power Save ModeNext Function Memory Auto TimerAuto Power Off/3H Repeat PlaybackAUX in or Tape Monitor Connection to a Stereo SystemSet Video Channel Access Video Channel ModeExit Video Channel Set Mode Video Channel SetTuner Set Auto Channel SetupConfir- onwards as Manual Channel SetupButton on the Remote Control to move the highlight bar Press Or EConfirmation screen appears To the preset position you want then pressChange Station Name Delete a ChannelThen press Change Station Preset PositionButton on the Remote Control until the item you want to Button to move the station to the new preset positionChannel that you wish to fine-tune then press Fine-Tuning Stored ChannelsButton on the Remote Control to move the highlight bar to TV Station ID GuideBBC1 BBC2 ITV CH4 CH5 TV Station Channel Number GuideOr E. Set the correct year Setting the ClockClock Set Or E. The dateTo receive the TV station then press Or E Manually Setting Guide Program NumbersCan the VCR indefinitely remain in the Record-Pause mode? Uand cremain lit on the display panel. Is there a problem?Question and Answers Can the VCR indefinitely remain in the still mode?Symptom Possible Cause TroubleshootingRecording Other Problems Record a Programme While Watching Another List of TermsMemo Memo HR-S5955/5956EK
Top Page Image Contents