JVC HR-S5956EK, HR-S5955EK manual Video Channel Set, Access Video Channel Mode, Set Video Channel

Page 44

S-VHS VCR

REVIEW

S-VHS VCR

REVIEW

S-VHS VCR

REVIEW

44

advanced features

Video Channel Set

before you start

The power cord must be plugged in and connected to the VCR

The VCR must be turned off and no cassette inserted

The Remote Control must have batteries inserted

The TV set must be turned on

The VCR can send picture signals to the TV set in one of two ways; RF (ordinary cable included with this VCR) and AV (via a 21-pin SCART cable available from TV and Hi-Fi dealers). Depending upon which method you use, the VCR must have the correct method set up in order to work. The Auto Setup procedure normally takes care of this but if for any reason this fails to happen, the instructions below describe how to set the Video Channel manually.

Access Video Channel Mode

Press and hold the Sbutton on the VCR until the display panel shows the following informa- tion:

Set Video Channel

for av connection Press Buntil the

display panel shows:

The Video Channel is now set to OFF. Go to Step 3.

for rf connection Press Aor Bto set the VCR to a vacant channel number between 22 and 69 which is not occupied by any station in your area (refer to station list on

page 49). In the example, we have presumed that channel 36 is vacant and have set the VCR to 36:

Now tune the TV set to channel 36 (refer to TV manual if necessary); you should see two vertical white bars appear on the TV screen. If the bars do not appear or are not clear, choose another vacant channel and try again. If you cannot obtain the vertical white bars on any channel between 22 and 69, consult your local JVC dealer.

Exit Video Channel Set Mode

Press

3

OK /

.

To view pictures from your VCR you must now set your TV to either the Video Channel or to AV mode, depending upon your choice above.

Image 44

Contents HR-S5955EK HR-S5956EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Rear panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyScart and rf Auto Setup Three-Step Quick StartTo connect the VCR to the TV with both the RF PressCheck the Results Finish OffGo straight to 2000 used as example only Perform Clock Set on Go to StepThree-step quick start Basic Features Playback Load a Video CassettePlay Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardSingle Frame Movement Playback FeaturesPause During Playback High Speed Search Slow MotionVariable Speed Search Recording Choose a ProgrammeSet the Tape Speed Start RecordingChange Display Information Resetting the CounterDisplay Tape Remaining Time Instant Timer Recording Recording Resume FunctionPress p. You will see the following TV screen information Get to the Video Plus + ScreenEnter the PlusCode Number Return to Normal Screen Engage Timer Mode Enter Programme Details Express Timer ProgrammingGet to the Programme Screen AUX Times as necessary Check, Cancel & Change ProgrammesPress c, then press oto disengage the timer mode Advanced Features Picture Quality Manual TrackingVideo Stabilizer Or E to set to onPicture Control Tape Type Super VHS ET S-VHS ETSee ‘Super VHS ET S-VHS ET’ on Super VHS S-VHS, S-VHS ET and VHSYour VCR can record in S-VHS, S-VHS ET or VHS Turning B.E.S.T. on or OFF Recording and Playback Using B.E.S.TAvoiding B.E.S.T. Time Delay Soundtrack Selection Sound ModesNicam Stereo and Bilingual Broadcasts Finding Specific Scenes Skip SearchIndex Search Instant ReViewOutput Setting EditingInput Setting For L-2 InputEditing Using Another VCR Your VCR as the Player Editing from a Camcorder Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerAuto Timer Auto Power Off/3HRepeat Playback Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorAccess Video Channel Mode Exit Video Channel Set ModeVideo Channel Set Set Video ChannelAuto Channel Setup Tuner SetManual Channel Setup Button on the Remote Control to move the highlight barPress Or E Confir- onwards asTo the preset position you want then press Change Station NameDelete a Channel Confirmation screen appearsChange Station Preset Position Button on the Remote Control until the item you want toButton to move the station to the new preset position Then pressFine-Tuning Stored Channels Button on the Remote Control to move the highlight bar toTV Station ID Guide Channel that you wish to fine-tune then pressTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Setting the Clock Clock SetOr E. The date Or E. Set the correct yearManually Setting Guide Program Numbers To receive the TV station then press Or EUand cremain lit on the display panel. Is there a problem? Question and AnswersCan the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRecording Other Problems List of Terms Record a Programme While Watching AnotherMemo Memo HR-S5955/5956EK