Initial Settings
Language Setting
The default setting is “ENGLISH”.
Turn on the VCR and TV, and select the VCR channel (or AV mode).
A Access Main Menu screen, then Initial | MAIN MENU | ||
Set screen | TUNER SET | ||
|
| FUNCTION SET | |
Press MENU on the Remote. Press rtto | INITIAL SET |
| |
|
| ||
move the highlight bar (arrow) to “INITIAL |
|
| |
SET”, then press OK or e. |
|
| |
| PRESS ( , ), THEN (OK) | ||
|
| PRESS (MENU) TO END | |
CSelect D.S.T. mode
Press OK or eto move the highlight bar to “D.S.T.”, then press rtrepeatedly until the desired setting is selected.
AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.) Be sure to select the correct time zone manually in step 4.
ON: Adjustment will be made by the
OFF: Select when Daylight Saving Time does not apply to you.
DSelect time zone
Press OK or eto move the highlight bar to “TIME ZONE”, then press rtrepeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as
BSelect language
This VCR offers you the language choice to view menus and some messages — in English, Spanish or French. Press rtto move the highlight bar (arrow) to “LANGUAGE”, then press OK or e repeatedly until the desired language is selected.
Press MENU to return to normal screen.
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH GUIDE CHANNEL SET CABLE BOX SET
DBS RECEIVER SET
SELECT WITH ( ,
) AND (OK)
PRESS (MENU) TO END
follows:
{AUTO {ATLANTIC {EASTERN {CENTRAL
{MOUNTAIN {PACIFIC {ALASKA {HAWAII
{(back to the beginning)
EComplete Semiauto Clock Set
Press MENU to return to normal screen. Turn off the VCR. “Aut” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
Language selection will be reset to “ENGLISH” after a power failure occurs.
Selections of host channel and D.S.T. mode will be reset to “AUTO” after a power failure occurs.
Clock Setting
Perform clock setting only if the clock has not been set correctly by the Plug&Play setting or if you use a cable box.
Turn on the VCR and TV, and select the VCR channel (or AV mode).
Setting clock manually
— Manual Clock Set
First follow steps 1 to 2 in “Preparations” above, then go to the following steps.
A Set time, date and year
Preparations
AAccess Main Menu screen, then Initial
Set screen
Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( ,
), THEN (OK)
PRESS (MENU) TO END
Press rtuntil the desired time appears, then press OK or e. Set the date and year in the same way.
● Holding rtchanges the time in 30- minute intervals, or changes the date in
B Select D.S.T. mode
Press OK or eto move the highlight bar to
BAccess Clock Set screen
Press rtto move the highlight bar (arrow) to “CLOCK SET”, then press OK or e.
Setting clock semiautomatically
— Semiauto Clock Set
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH GUIDE CHANNEL SET CABLE BOX SET
DBS RECEIVER SET
SELECT WITH ( ,
) AND (OK)
PRESS (MENU) TO END
“D.S.T.”, then press rtto select the desired setting.
ON: Adjustment will be made by the
OFF: Select when Daylight Saving Time does not apply to you.
CStart clock
Press MENU and normal screen appears.
You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps 1 to 2 in “Preparations” above, then go to the following steps.
NOTE:
The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
To make corrections any time during the process
Press OK or erepeatedly until the item you want to change blinks, then press rt.
Manual setting of the clock will be lost after a power failure occurs.
ASet Auto Clock to ON
Press OK or eon the Remote repeatedly to move the highlight bar to “AUTO CLOCK”, then press rtso that “ON” is selected.
BSelect host channel
CLOCK SET |
| ||
TIME | DATE | YEAR | |
– | 1/ 1 |
| 03 |
AUTO CLOCK : ON |
| (CATV) | |
HOST CH | : AUTO | ||
D.S.T. | : AUTO |
| |
TIME ZONE | : AUTO |
| |
PRESS ( ,
), THEN (OK)
PRESS (MENU) TO END
You can either select “AUTO” or enter a PBS channel number. Press OK or eto move the highlight bar to “HOST CH”, then press rtrepeatedly until “AUTO” or the desired PBS channel number is selected.
● Some PBS channels do not transmit clock setting data.
CONTINUED ON NEXT PAGE
— 6 —