JVC HR-S5911U Connect Controller to VCR, Turn on cable box or DBS receiver, Select output channel

DConnect Controller to VCR

Connect the Controller to the CABLE BOX Controller connector on the rear panel.

ETurn on cable box or DBS receiver

Select a channel other than channel 9 on your cable box, or channels 100, 205 on your DBS receiver.

FAccess Main Menu screen, then Initial Set screen on VCR

Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.

G Access Cable Box Set screen or DBS

Receiver Set screen

Press rt to move the highlight bar (arrow) to “CABLE BOX SET” or “DBS RECEIVER SET”, then press OK or e.

H Select output channel

Your selection depends on how the unit is connected to your VCR.

●If the unit is connected to your VCR’s

ANT. IN terminal on the rear panel,

Press rt until the channel number representing the cable box’s output (CH2

– CH9) or DBS receiver’s output (CH3 or CH4) appears on the screen.

●If the unit is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel, press rt until “ON F-1 (FRONT)” appears on the screen.

●If the unit is connected to your VCR’s AUDIO/VIDEO IN connectors on the rear panel, press rt until “ON L-1 (REAR)” appears on the screen.

●If you do not use any unit, press rt until “OFF” appears on the screen.

IAccess Brand Set screen

Press OK or e.

●If the Clock Set screen appears, perform “Manual Clock Set”. If you press MENU after the clock has been set, the Brand Set screen appears.

J Enter brand code and perform test

Press the appropriate Number keys on the Remote to enter the brand code from the following list, then press OK or e.

CABLE BOX BRAND	CODE
ARCHER	1, 5, 17
CABLETENNA	1, 17
CABLEVIEW	15, 16, 17, 21, 25
CITIZEN	15, 16, 17, 21, 25
CURTIS	2, 8
DIAMOND	1, 17
GC BRAND	15, 16, 17, 21, 25
GEMINI	15
GENERAL INSTRUMENTS	1, 4, 6, 11, 12, 15, 28
HAMLIN	10, 18, 23
JASCO	15
JERROLD	1, 4, 6, 11, 12, 15, 28
NOVAVISION	2, 8
OAK	7, 20
PANASONIC	13, 14
PULSER	15, 16, 17, 21, 25
RCA	13, 14
REGAL	10, 18, 23
REMBRANDT	1, 16, 17
SAMSUNG	5, 16, 24
SCIENTIFIC ATLANTA	2, 8
SIGMA	7, 20
SL MARX	5, 16, 17, 24, 25
SPRUCER	13, 14
STARGATE	5, 15, 16, 17, 21, 24, 25
TELEVIEW	5, 16, 24
TOCOM	1, 4, 16
UNIKA	1, 17
UNIVERSAL	16, 17, 25
VIDEOWAY	3, 9, 22
ZENITH	3, 9, 22

DBS RECEIVER BRAND	CODE	DBS RECEIVER BRAND	CODE
JVC (DISH Network)	51	SONY (DSS)	41
ECHOSTAR (DISH	51	RCA (DSS)	40
Network)

For cable box

●If the cable box’s channel changes to 9, setting is complete. Press OK.

● If the cable box’s channel does not change to 9;

A Press rt to move the highlight bar (arrow) to “NO”, then press OK or e.

BRepeat step 0 until the cable box’s channel changes to 9 by entering another code.

CIf the channel does not change after going through all the code numbers listed for your model of cable box, then try all the

other numbers.

For DBS receiver

●If the DBS receiver’s channel changes to the channel listed below for your brand,

setting is complete. Press OK or e.

JVC	] 100	SONY ]205
ECHOSTAR ] 100		RCA ]205

●If the DBS receiver’s channel does not change as shown above;

APress rt to move the highlight bar (arrow) to “NO”, then press OK or e.

BRepeat step 0.

— 8 —