JVC HR-S9900U 12 EN, Setting clock manually

12 EN INITIAL SETTINGS (cont.)

4– 7

Setting clock manually

—Manual Clock Set

First follow steps 1to 3on page 10, then go to the following4steps.

84– 6

Set time

On the front panel: Press CH5∞ until the desired time appears, then press OK.

On the Remote:

Press %fi until the desired time appears, then press OK or #.

CLOCK SET
TIME	DATE YEAR
– –:– –AM	1/ 1	00
AUTO CLOCK : ON
HOST CH	: AUTO	(CATV)
D.S.T.	: AUTO
TIME ZONE	: AUTO

PRESS (5,∞), THEN (OK)

PRESS (MENU) TO END

VCR TV CABLE/DBS

1 2 3

4 5 6

7 8 9

0

4– 78 4

– 6

●Holding CH 5∞ or %fi changes the time in 30-minute intervals.

●When the time is entered manually, “AUTO CLOCK” is automatically set to “OFF”, and

5“HOST CH” and “TIME ZONE” disappear.

Set date

On the front panel:

Press CH 5∞ until the desired date appears, then press OK.

On the Remote:

Press %fi until the desired date appears, then press OK or #.

●Holding CH 5∞ or %fi changes the date in 15-

6day intervals.

Set year

On the front panel:

Press CH5∞ until the desired year appears, then press OK twice.

On the Remote:

Press %fi until the desired year appears, then press

7OK or # twice.

Select D.S.T. mode

You can select either “ON” or “OFF”.

ON– Adjustment will be made by the built-in clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

On the front panel:

Press CH5∞ to select the desired setting.

On the Remote:

8Press %fi to select the desired setting.

Start clock

Press MENU and normal screen appears.

To make corrections any time during the process

Press OK or # repeatedly until the item you want to change blinks, then press CH 5∞ or %fi.