JVC HR-S9900U manual Prepare tapes, 1Locate end point, Locate start point, Activate editing mode

Page 69

1

Make connections

Connect an audio/video cable between the VCR’s audio/video input connectors and the other

2component’s audio/video output connectors.

Prepare tapes

Load the source tape on the other VCR, and the

3tape to be edited on this VCR.

Select input mode

Select “F-1” — when connecting the other component to the audio/video input connectors on the front panel.

Select “L-1” — when connecting the other component to the audio/video input connectors on the rear panel.

On the front panel:

Press CH5∞.

On the Remote:

4Press the Number key “0 (AUX)” or CH +/–.

Select video input terminal

Follow the procedure described on pages 56 and 60.

When using S VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT” if you use the connectors on the rear) to “S-VIDEO”.

When using VIDEO terminal, set “FRONT AUX

5INPUT” (or “REAR AUX INPUT”) to “VIDEO”.

Select edit mode

Set the edit mode to “ON” for the VCRs if such a mode is equipped.

●On this VCR, set “PICTURE CONTROL” to

“EDIT” by following the procedure described

6on pages 56 and 57.

1Locate end point

2Press PLAY ( 3 ) to start playback.

Press PAUSE ( 8 ) when you find the end of

3the scene for which you want to edit. Press C. RESET so that the counter reading becomes “0:00:00”.

NOTE:

You can also use FF ( ), the TIME SCAN SHUTTLE ring on the front panel, and the JOG/SHUTTLE ring on the Remote to locate the end point (See “Special Effect Playback”:  pg. 34) .

EN 69

7Locate start point

Use REW ( ), the TIME SCAN SHUTTLE ring on the front panel, or JOG/SHUTTLE ring on the Remote to reverse the tape. (See “Special Effect Playback”:  pg. 34.)

When you find the beginning of the scene you

8want to edit, press PAUSE ( 8 ).

Activate editing mode

For Inset Editing:

Press INSERT on the front panel.

For AV Dubbing:

Press INSERT, then press A. DUB on the front panel.

●Make sure that the recording format (VHS, S- VHS or S-VHS ET) on the VCR is the same as that of the original recording on the tape.

●During Insert Editing pause mode ( , and light up on the front display panel.)

●During AV Dubbing pause mode ( and

blink, and lights up on the front display

9panel.)

Start editing

Press PLAY ( 3 ) on this VCR, and start playback on the other component at the same time.

●During Insert Editing mode ( and light up on the front display panel.)

●During AV Dubbing mode ( and blink on the front display panel.)

●When the counter reading becomes “0:00:00”, editing automatically stops, and the VCR starts normal playback.

To stop editing any time during recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

NOTES:

●Be sure to select “AUTO” for “PICTURE CONTROL” (or

“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish editing the tapes ( pg. 56 and 57).

●Editing cannot be performed on a tape with its record safety tab removed.

●The recording speed (SP/EP) is determined by the previous recording to be replaced. If the recording speed changes on the tape to be edited while editing the tape, the inserted picture will be distorted where the recording speed changes.

●When you edit a tape, a small portion of the recording preceding to the editing start point will be erased from the edited tape.

Page 68 Page 70
Image 69
Page 68 Page 70
Contents HR-S9900U Telephone Number Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Back of VCR Basic ConnectionsConnect VCR to power source Check contentsSituate VCR Connect VCR to TVPlug & Play Setting Perform Plug & Play setupWhat to do if Plug & Play setting failed Language SettingAccess Clock Set screen Clock Setting10 EN 1PreparationsSelect D.S.T. mode Setting clock semiautomaticallySet Auto Clock to on Select host channel12 EN Setting clock manuallySetting channels automatically Tuner SettingAccess Tuner Set screen Perform Auto Channel SetSetting channels manually Access Manual Channel Set screenManual Channel Set Select a channel and set ghost reduction Mode Setting ghost reductionWhat is a ghost? Keys or %fi to input16 EN Cable Box Control SettingAccess Main Menu screen on VCR Access Cable Box Set screenTurn on cable box Access Cable Box Brand Set screen Select cable box output channelEnter cable box brand Cable BOX Brand List How to control the DBS receiver 20 ENConnect DBS receiver to VCR Turn on DBS receiver Access DBS Receiver Set screenSelect DBS receiver output channel DBS Receiver SET, then press OK or #Access DBS Receiver Brand Set screen 22 ENEnter DBS Receiver’s brand Playback BasicLoad a cassette Start playback24 EN Basic Playback FeaturesChanging display information Checking tape positionPlaying back tape repeatedly Adjusting tracking conditionSelecting monitor sound Automatic operations afterAccess distant code Locating beginning of timer26 EN Locating beginningSkipping unwanted portions Adjusting picture conditionSkip Search Digital TBC/NR28 EN Basic RecordingSelect recording channel Set tape speedTo fast-forward the tape when it is not running To pause recordingTo stop recording Basic Recording Features 30 ENSpecifying recording length Showing on-screen display Watching one program while recording anotherAdjust recording level Adjusting recording levelOn the Remote Press %fi to adjust 32 ENRecord safety tab Other useful functions for recordingAccidental erasure prevention 34 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchPause during playback Viewing still pictureAdvance or reverse still picture Variable-Speed Picture SearchViewing slow motion picture 36 ENSlow Motion Playback Pro-Slow On the Remote During normal playbackAudio is Audio is output Not output Output How to use the Shuttle ring on the RemoteSounds reproduced by the TimeScan function Playback tapeAccess PlusCode No. + screen VCR Plus+ Timer ProgramingPress PROG. on Remote Clock must be set to access 38 ENInput receiving channel number Engage timer recording standby modeChanging VCR Plus+ Setting 40 ENVCR Plus+ guide channel matching Access Initial Set screen Input receiving channel number Access Guide Channel Set screenInput guide channel number 42 EN Express Timer ProgramingTo use the VCR while it is in timer recording standby mode To timer-record daily Monday-Friday or weekly serials44 EN Checking program settingsSelect program to modify Confirm overlapping programs46 EN NavigationSelect program Press NavigationDeactivate Video Navigation Deactivating Video NavigationEditing Titles Access Edit Title screen48 EN Editing tape titleEditing program title and category How to enter the charactersSelect tape title Enter titleDeleting tape information 50 EN3 D 2,3 Delete tape informationChecking memory Deleting program informationCheck memory Delete program informationFinding Tapes Access tape number screen52 EN Finding by tape numberFinding by recording date Finding by categoryConform tape number lists Confirm tape number lists54 EN Access Find Title screen3,5 To go to another page of the lists, press @ #Position Unrecorded portion Current tapeAccess Function Set screen SettingsChange setting 56 ENWhen this function is set to OFF When this function is set to onFor Example 58 ENBy connecting other JVC’s AV Compulink components see Mode is used for recording on S-VHS tapesDiagram on the next page, including amplifiers or receivers Via their AV Compulink connectors becomes possible60 EN Set timer program on DBS receiver 62 EN Child LockSet Jlip ID Number Jlip ID NumberSelect Jlip ID Number Set screen To change the Jlip ID number of this VCR, follow64 EN Edit From CamcorderConnection Various connection for editing tapesMake connections Select input mode on this VCRSelect video input terminal Set Picture Control to EditSelect edit mode Select input mode on recording VCREdit To Or From Another 66 ENAudio Dubbing Activate Audio Dubbing mode1Locate start point Start audio dubbingAnother VCR for playback 68 ENInsert Editing Source tape Edited tape AV Dubbing Source tape Edited tapePrepare tapes Activate editing mode1Locate end point Locate start point70 EN TV BrandTurn on the cable box Cable BoxEnter cable box brand code Operate cable boxDBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codeRemote Control ChangingCode 74 EN TroubleshootingTimer Recording Video Navigation 76 ENWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?List of terms 78 ENOK button 3NAVIGATION button  pg #S-VIDEO input connector  pgRemote Pause terminal  pg 80 ENHow to use the Remote 82 EN Usable cassettesFull-Size VHS 30 ST-30 HOW to Locate Your JVC Service Center 84 EN Limited WarrantyMemo 86 EN Page HR-S9900U

HR-S9900U specifications

The JVC HR-S9900U is a high-end VCR that exemplifies advanced technology and design, catering to avid collectors and home theater enthusiasts alike. Introduced in the late 1990s, this model stands out for its impressive array of features, making it a sought-after device for those who appreciate high-quality video playback and recording.

One of the defining characteristics of the HR-S9900U is its S-VHS (Super VHS) capability, which significantly enhances the resolution and quality of recorded tapes. This technology allows for a sharper and more detailed image compared to standard VHS, making it ideal for preserving home videos and important recordings. The VCR also supports S-VHS ET, which enables the playback of S-VHS tapes in standard VHS players, ensuring compatibility across different formats.

The HR-S9900U features dual playback heads, which improve the tracking accuracy and overall picture quality. This dual-head design not only enhances the clarity of the video but also minimizes artifacts like noise and distortion commonly found in conventional VHS playback. Coupled with advanced digital noise reduction technology, the VCR produces cleaner and clearer images even on older tapes.

Another key highlight of the HR-S9900U is its extensive editing functionalities. It includes features such as high-speed search and frame advance, which allow users to edit and create their own compilations with precision. Additionally, the model is equipped with the "Jog Shuttle" control for precise frame-by-frame navigation, making it easier to find and cut specific moments when editing.

The build quality of the HR-S9900U deserves mention; it features a solid construction that provides durability and a professional feel. The user-friendly interface is complemented by a remote control, which adds convenience for managing playback and recording settings from a distance.

In terms of connectivity, the JVC HR-S9900U includes multiple input and output ports such as S-Video, Composite Video, and Audio outputs. This versatility allows users to connect to various display devices, ensuring compatibility with modern televisions and audio systems.

Overall, the JVC HR-S9900U is a remarkable example of video recording technology from its era. With its S-VHS capabilities, dual-head design, and thoughtful editing features, it remains a valuable option for enthusiasts who value video fidelity and functionality in their home recording systems. Whether preserving cherished memories or curating a video library, the HR-S9900U continues to deliver exceptional performance.
Top Page Image Contents