JVC HR-S6950EU, HR-S6953EU specifications 22 EN

Page 22

22 EN

RECORDING

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 23) or timer recording ( pg. 26, 28, 30), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

NOTE:

If a power outage exceed the recorder’s memory backup time, Recording Resume Function does not work.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder checks the tape information for Programme Navigation. For details, refer to “Navigation” ( pg. 34).

B Choose a programme.

Press PR +/– or the number keys. Or push the JOG dial and turn it to the left or right to select the channel you wish to record.

C Set the tape speed.

Press SP/LP/EP (p). The current setting appears on the front display panel or TV screen. Press SP/LP/EP (p) again to change the setting while the tape speed is displayed on the TV screen.

●In EP mode, the recording time is extended three times.

●If you record a programme in EP mode on this recorder, it is recommended to play back the EP-recorded tape on this recorder.

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 50)

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

●If “O.S.D.” is set to “ON” ( pg. 47), “MARK” blinks on the screen while an index code is being marked.

●When “DIRECT REC” is set to “ON” ( 48), if you press any button just after pressing 7 on the recorder (or 7 and 4 on the remote control), the recorder may not function properly.

B.E.S.T. takes place at the beginning of both the first SP and the first LP (or EP) recording after inserting the cassette. ( pg. 25)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 48).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewRear View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTurn on the recorder Auto Set Up10 EN Select your countryConfirm/Set video channel Perform Auto Set UpSelect the language On the front display panelSet the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 14 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec Basic Playback 18 ENPause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playbackIndex Search 20 ENVariable Speed Search Skip SearchManual Tracking Next Function MemoryRepeat Playback Soundtrack Selection22 EN Instant Timer Recording ITR Tape Remaining TimeSuper VHS ET S-VHS ET Engage the S-VHS ET mode24 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 26 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 28 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+30 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Disengage the timer modeCancel or change a programme Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode Before performing the following stepsNavigation 34 ENLoad a recorded cassette Navigation PlaybackProgramme Navigation Screen Select a programmeEdit Programme Title 36 ENSelect the programme Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 38 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerOutput/Input Set Select and L-2 Input Setting Decoder connectorConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode44 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingSystem to on or OFF  pg When this function is set to ON, the timer is automaticallyDisengaged when the recorder is powered back on According to your preference. Normally select Auto48 EN On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode Function  pg , set PROG. Navigation to OFFMode setting Indicator lights up on the front display panelS-VHS recording mode is selected VHS recording mode is selected50 EN About Ntsc PlaybackGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program number52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 56 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen58 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS66 EN Memo

HR-S6953EU, HR-S6950EU specifications

The JVC HR-S6950EU and HR-S6953EU are renowned VHS video cassette recorders that garnered attention for their advanced features and innovative technologies during their release period. These two models are part of JVC's S-VHS lineup and represent the culmination of JVC's commitment to delivering high-quality audio and video recording and playback.

One of the standout features of both models is their S-VHS capability, which significantly enhances picture quality compared to standard VHS. The S-VHS format allows for recording at a higher resolution, resulting in sharper images and improved color fidelity. This makes the HR-S6950EU and HR-S6953EU ideal choices for those seeking impressive visual performance, whether recording home videos or capturing special events.

Both models come equipped with JVC's unique Super S-VHS ET (Enhanced Technology) function. This technology allows for the playback of standard VHS tapes with enhanced quality, giving users the option to play their existing library of VHS content while enjoying improved image quality. This dual functionality is especially attractive for users transitioning from traditional VHS to the superior S-VHS format.

Another notable characteristic of the HR-S6950EU and HR-S6953EU is their built-in digital noise reduction system. This feature helps to minimize graininess and other visual distortions, producing clearer images and more vibrant colors. The noise reduction technology benefits recordings made in less-than-ideal lighting conditions, making these models versatile for various recording environments.

The VHS recorders also incorporate a convenient timer function, allowing users to schedule recordings in advance. This is particularly useful for capturing television shows or special broadcasts without needing to be present when they air. Additionally, both models offer various playback controls, including slow motion and frame-by-frame advance, allowing users to meticulously review their recordings.

In terms of design, the HR-S6950EU and HR-S6953EU are user-friendly, featuring an intuitive control panel and easy-to-read display. The compact size of these models makes them easy to integrate into any home entertainment setup.

Overall, the JVC HR-S6950EU and HR-S6953EU reflect JVC's dedication to quality and innovation in the VHS recording market. With their advanced S-VHS technology, digital noise reduction, and user-friendly features, these video cassette recorders provide an exceptional recording and playback experience for users who value performance and convenience in their home video equipment.
Top Page Image Contents