JVC HR-S6953EU, HR-S6950EU Another Video Recorder, Advantages of S-VHS video recorders

Page 39

EN 39

Edit To Or From

Another Video

Recorder

A

 

 

TV receiver

Player

Your recorder

 

21-pin SCART cable

 

 

(not provided)

 

AV mode

 

 

 

Another recorder

 

Recorder

 

B

 

 

Recorder

Your recorder

TV receiver

21-pin SCART cable

 

(not provided)

AV mode

 

 

Another recorder

 

Player

 

 

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

You can use your recorder as the source player or as the recording deck.

A Make connections.

Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated.

AWhen using your recorder as the source player ...

... connect its AV1 (L-1) IN/OUT connector to the recording deck.

BWhen using your recorder as the recording deck ...

... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/

DECODER connector to the source player.

●If another recorder is compatible with the Y/C signal ...

... when using your recorder as the source player, set “L-1 OUTPUT” to “S-VIDEO” ( pg. 40).

... when using your recorder as the recording deck, set “L-2 INPUT” to “S-VIDEO” ( pg. 41).

B Set the input mode of recording deck.

With this video recorder, press AUX (number key “0”) and/or PR to select “L-1” for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2) IN/DECODER connector, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

●When using the AV2 (L-2) IN/DECODER connector, set “L-2 SELECT” to “A/V” ( pg. 41).

C Set the edit mode.

See “PICTURE CONTROL” on page 47.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting ( pg. 47).

●If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this recorder’s front panel S-VIDEO and AUDIO input connectors. Then, set the recorder’s input mode to “S-1” in step 2.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVSelect your country Auto Set Up10 EN Turn on the recorderOn the front display panel Perform Auto Set UpSelect the language Confirm/Set video channelPress rt to select CH - and press OK or e Perform Preset Download12 EN Set the video channelJust Clock Language for the on-screen display14 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller16 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 18 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 20 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking22 EN Tape Remaining Time Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode24 EN Super VHS ET S-VHS ETRecording Playback26 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode28 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 30 ENAccess the Programme Check screen/display Disengage the timer modeCancel or change a programme Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyBefore performing the following steps Select the L-2 Select modeRecording mode Programme Recording34 EN NavigationSelect a programme Navigation PlaybackProgramme Navigation Screen Load a recorded cassette36 EN Edit Programme TitleSelect the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data38 EN Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersOutput/Input Set Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode44 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeAccording to your preference. Normally select Auto When this function is set to ON, the timer is automaticallyDisengaged when the recorder is powered back on System to on or OFF  pgFunction  pg , set PROG. Navigation to OFF On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 48 ENVHS recording mode is selected Indicator lights up on the front display panelS-VHS recording mode is selected Mode settingAbout Ntsc Playback 50 ENEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAuto Channel Set Access the Auto Channel Set screenTuner Set 52 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled Broadcast56 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set58 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data60 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 62 ENOther Problems Playback 64 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan system66 EN Memo

HR-S6953EU, HR-S6950EU specifications

The JVC HR-S6950EU and HR-S6953EU are renowned VHS video cassette recorders that garnered attention for their advanced features and innovative technologies during their release period. These two models are part of JVC's S-VHS lineup and represent the culmination of JVC's commitment to delivering high-quality audio and video recording and playback.

One of the standout features of both models is their S-VHS capability, which significantly enhances picture quality compared to standard VHS. The S-VHS format allows for recording at a higher resolution, resulting in sharper images and improved color fidelity. This makes the HR-S6950EU and HR-S6953EU ideal choices for those seeking impressive visual performance, whether recording home videos or capturing special events.

Both models come equipped with JVC's unique Super S-VHS ET (Enhanced Technology) function. This technology allows for the playback of standard VHS tapes with enhanced quality, giving users the option to play their existing library of VHS content while enjoying improved image quality. This dual functionality is especially attractive for users transitioning from traditional VHS to the superior S-VHS format.

Another notable characteristic of the HR-S6950EU and HR-S6953EU is their built-in digital noise reduction system. This feature helps to minimize graininess and other visual distortions, producing clearer images and more vibrant colors. The noise reduction technology benefits recordings made in less-than-ideal lighting conditions, making these models versatile for various recording environments.

The VHS recorders also incorporate a convenient timer function, allowing users to schedule recordings in advance. This is particularly useful for capturing television shows or special broadcasts without needing to be present when they air. Additionally, both models offer various playback controls, including slow motion and frame-by-frame advance, allowing users to meticulously review their recordings.

In terms of design, the HR-S6950EU and HR-S6953EU are user-friendly, featuring an intuitive control panel and easy-to-read display. The compact size of these models makes them easy to integrate into any home entertainment setup.

Overall, the JVC HR-S6950EU and HR-S6953EU reflect JVC's dedication to quality and innovation in the VHS recording market. With their advanced S-VHS technology, digital noise reduction, and user-friendly features, these video cassette recorders provide an exceptional recording and playback experience for users who value performance and convenience in their home video equipment.
Top Page Image Contents