![](/images/new-backgrounds/1278193/27819353x1.webp)
E
N
27
Simple | 1 | |
Recording | ||
| ||
| 2 | |
Turn on the TV and select the VCR channel 3 or 4 (or AV | ||
| ||
mode). |
| |
|
|
REC | PAUSE | TOP/EJECT | PLAY |
|
| ||
|
| 8 | |
|
|
| |
| SP/EP |
| 3 |
| CH | 4 | |
|
|
|
|
|
|
| ENTER | 5 |
|
|
|
|
| |
| 1 | 2 | 3 |
|
|
NUMBER | 4 | 5 | 6 |
| 6 |
| 0 |
|
| ||
| 7 | 9 |
| ||
| 8 |
|
|
LOAD A CASSETTE
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
SELECT RECORDING
CHANNEL
Press CH5°. Or press the appropriate NUMBER keys, then press ENTER. (The channel changes after a few seconds whether you press ENTER or not.)
●If you use the RF connection, by pressing the TV/VCR button, select VIDEO mode to view the program to be recorded.
SET TAPE SPEED
Press SP/EP to set the recording speed.
START RECORDING
Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel.
PAUSE/RESUME
RECORDING
Press PAUSE. Press PLAY to resume recording.
●During record pause, you can change the recording channel by using the CH5°buttons or NUMBER keys.
STOP RECORDING
Press STOP or STOP/EJECT. Then press STOP/EJECT to remove the cassette.
V/VCR![](/images/new-backgrounds/1278193/27819353xi104.webp)
SP/EP
REC
STOP
CH
PLAY
PAUSE
Accidental erasure prevention
●To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab