JVC HR-S9400U Unplug Vcrs Power, SET A/B Code Switch, Plug in Power Cord, Turn VCR Power on

Page 63

POWER

A/B CODE

1 2 3

4

5

6

7 8 9

TIMER

0

EN63

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. You can set this VCR so it responds to remote commands only when the switch is set to B, and another VCR so it responds to commands when the switch is set to A. The switch is preset to A because this VCR normally responds to A-code signals. Follow steps 1 4 to set this VCR to respond to B-code commands.

 

 

 

UNPLUG VCR'S POWER

 

1

 

CORD

 

 

Unplug from the AC outlet.

 

2

 

SET A/B CODE SWITCH

 

 

Set the A/B CODE switch on the remote control to B.

 

3

 

PLUG IN POWER CORD

 

 

Plug back in to the AC outlet.

 

4

 

TURN VCR POWER ON

 

 

Press POWER on the remote.

 

 

 

 

The VCR will now respond only to B-code commands.

To set the VCR back to respond to A code signals, repeat the same procedure as shown above except setting the A/B CODE switch to A instead of B in step 2.

You can control two VCRs with the same remote control by switching the remote's code between A and B.

Child Lock

This feature allows you to prevent the operation of the VCR.

TURN VCR POWER ON

1 Press POWER.

ENGAGE CHILD LOCK

2 Press and hold POWER on the remote control until the Child Lock indicator ("—") appears on the front display panel.

Power turns OFF and the VCR cannot be turned on from the POWER button on the front panel.

To cancel Child Lock, press and hold POWER on the remote to turn the VCR on. During timer recording, pressing TIMER also cancels Child Lock.

NOTES:

When Child Lock is engaged, make sure to keep the remote control out of the reach of children.

Timer recording of programs that were previously set can be performed while the Child Lock is engaged. The feature remains in effect after the recording is finished.

Image 63
Contents HR-S9400U Do not place the VCR Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesDamage Requiring Service CleaningContents Connections Audio/Video Cable supplied RF Cable Supplied AC Power Cord Not suppliedAntenna or Cable AC OutletNot SET ClockNitial Sett Ings Advanced Auto Clock SetScreen Access ON-SCREENTurn on the VCR MenuSelect Time Zone Access Select ScreensInitial Settings Select Host ChannelMake Corrections Select D.S.T. ModeSelect Mode SET DATE, Time and D.S.TSelect Language Access LanguageEN Initial Settings LanguageTuner Access Main MenuAccess Tuner SET Access Band ScreenAuto Channel SET CH 2 ADD Scanning Press Menu to END Press Menu as many times as necessaryStore or Skip Desired Channel Access Tuner SET ScreenAccess AFC Screen Make SelectionConnect Cable BOX to VCR Cable Box ControlSituate Controller Attach ControllerOutput Screen Access Cable BOXSet Cable Box Brand Access Cable BOXTurn on Cable BOX Brand SET ScreenBrand Code You can now set up the VCR Plus+ feature pgChannel Number Matching VCR Plus+ SetupAccess Main Menu Turn on the VCRNumber Access Function SET 3 ScreenAccess Guide Channel SET Screen Input Guide ChannelCheck Input Data Input Receiving Channel NumberDBS receiver DBS Receiver ControlTo VCR Connect ControllerAccess Main Menu Screen Set DBS Receiver Output ChannelOr Time Turn on DBS Receiver Enter DBS Receiver BrandSet DBS Receiver Brand Start Playback Simple PlaybackLoad a Cassette Find Program Start PointSimple Recording Activate SLOW-MOTION FeaturesActivate FRAME-BY Frame PlaybackAccess Distant Code Engage Manual Tracking ModeAdjust Manual Tracking Contrast ModeReturn to Normal Layback and Recording FeaturesActivate Video StabilizerSuperimpose Select The Soundtrack Access Audio MonitorReturn to Counter Position Zero Stop RepeatActivate Counter MemoryAV Compu Link Playback Tape Position IndicatorMake Connection Next-Function MemoryFunction Screen Access Function SET ScreenAccess Special Enable AV Compu LinkCommercial Advance works as follows Commercial AdvanceRECORD, then press OK Arrow next to CAVariable-Speed Search/ Reverse Play Audio signal during TimeScanTime Scan Shuttle Indicator TimeScanSkip Search Skip Over Unwanted SectionsTimeScan Audio Access TimescanEN P Layback and Recording Features Audio ScreenRecording Features VHS Super VHS and VHS Access S-VHS ModeTo Record Stereo Programs Access 2ND AudioStereo And SAP Second Audio Program To Record SAP ProgramsHi-Fi Audio Recording Level Control Adjust Audio Recording LevelSET Recording Instant TimerEngage ITR Mode Timer RecordingEnter Pluscode Number VCR Plus+ Timer ProgrammingEN Timer Recording When Using The Illumi-Guide FeatureNumber keys, CH 5 or Time Scan 5 to obtain Engage Timer ModeCHECK/CORRECT Input DataMenu On-Screen Timer ProgrammingAccess ON-SCREEN Access Program SET ScreenSET Program Information RE-ENGAGE Timer Disengage TimerAccess Program SET Cancel a ProgramOr, during on-screen timer programming Access Auto Timer ScreenAccess Auto Timer Auto TimerMode Edit From a CamcorderMake Connections SET RECORDER’S InputSET 1 Screen Access AUX InputReturn to Main Menu Screen Return to FunctionStart Recorder Edit To Or From AnotherLoad Cassettes Engage Tape DubbingStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingLocate END Point Reset the CounterEngage Insert Editing Start EditingEND Insert Editing TOP Random As- semble EditingPrepare for Editing EN EditingTo Make Corrections Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditOperate TV SET Remote Control ModeTurn on the TV SET TV Brand CodeOperate Cable BOX Cable Box Multi-Brand Remote ControlTurn on the Cable BOX Enter Cable BOX BrandReceiver SET Remote ControlRemote Control Turn on the DBSTurn VCR Power on Unplug Vcrs PowerSET A/B Code Switch Plug in Power CordInfo Rmation on J Terminal Access Jlip ID NO. SET ScreenTerminal JLIPJoint Level Interface Protocol Connector SET Jlip ID NumberCassette gets stuck partway Troubleshooting E NSymptom TV/CABLE/DBS/VCR switch isOubleshooting Timer againRe-perform the VCR Plus+ setup Doesn’t work properly When scanning channels, someResume recording Remote control won’t operate Can the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?What happens if the tape runs out during recording? Select DBS Receiver Output Channel MBR Multi-Brand Remote Code SettingIndex List Of TermsEN Index Open the lid to access covered connectors and buttonsRear View Remote Control Provided Installing BatteriesHow To Use Specifications For Servicing Only in U.S.A HOW to Locate Your JVC Service CenterLimited Warranty Warranty Only in U.S.AHR-S9400U