JVC HR-J4010UM manual Adjusting tracking condition Tracking Adjustment, Basic Recording

– Playback –

Playback Features

Adjusting tracking condition

–Tracking Adjustment

Automatic tracking adjustment

Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Recording

It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on

it later, cover the hole with adhesive tape.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, press SET –/+ on the Remote to eliminate the

Basic Recording

1Load a cassette

Record safety tab

noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.

•Press SP/EP on the Remote to reactivate automatic tracking.

Playing back tape repeatedly

–Auto Repeat Play

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.

• The VCR turns on, and the counter is reset, automatically.

2 Select recording channel

Press CH–/+ or the Number keys on	CH 110
the Remote [CH–/+ on the VCR].

• If you connect the TV and the VCR

only using the RF connection, press

TV/VCR on the Remote so that the

1Access Menu screen

Press MENU on the Remote. Press SET –/+ to select “AUTO REPEAT”.

2Select ON/OFF

Press ENTER to select “ON” or “OFF”.

Press MENU to return to normal screen.

MENU

CLOCK SET

TIMER REC SET

AUTO REPEAT ON OFF CH SET UP

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND ON OFF

〈+/—/ENTER/MENU〉

MENU

CLOCK SET

TIMER REC SET

AUTO REPEAT ON OFF CH SET UP

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND ON OFF

〈+/—/ENTER/MENU〉

TV/VCR indicator lights to view the program to be

recorded.

3Set tape speed Press SP/EP.

00 : 00 : 00 SP

4 Start recording

On the VCR, press REC. Or on theCH 110 Remote, while holding REC, press

3Start Auto Repeat Play Press PLAY. The tape will play over and over until the repeat mode is canceled.

PLAY ().

The REC indicator will light.

During recording

Pause recording

Press PAUSE.

• Press PAUSE to resume recording.

•You can select channel in the recording pause mode.

Stop recording

Press STOP ( ) on the	OR Press STOP/EJECT
Remote.	(■/ ) on the VCR.