– Recording –
Recording Features
Specifying recording length
- One Touch Timer Recording (OTR)
The
EXAMPLE:
When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV.
1Load a cassette tape with the erase prevention tab intact.
2Press SP/EP to select the desired tape speed SP or EP.
The counter and SP or EP will appear on the screen for about 4 seconds.
00 : 00 : 00 SP
Timer Recording
Timer recording can be programmed
NOTES:
•After timer recording is completed, the VCR turns off automatically.
•You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.
•The timer recording will start at 20 seconds before the time you predetermined.
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).
When a TV is connected with an audio/video cable, turn the TV and this VCR on and select the video input mode on the TV.
3 Press the Number keys or CH
1 Press MENU on the Remote. |
MENU
CLOCK SET
to select the channel to be recorded.
CH 125
Check the “TIMER REC SET” |
option is selected, then press |
ENTER. |
TIMER REC SET
AUTO REPEAT ON 
OFF 
CH SET UP
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
The channel number will appear on the screen and display for about 4 seconds.
2 Press SET |
of the program lines, then |
press ENTER. |
ON OFF
〈+/—/ENTER/MENU〉
DATE | START | END | CH |
– – – – – | – – – |
4Press REC on the VCR or while holding REC, press PLAY (
) on the Remote to begin recording. Press REC on the VCR again to stop recording after 30 minutes. Each additional press of REC will increase recording time as shown in the chart below, up to a maximum of 5 hours. The OTR and recording time will appear on screen for about 4 seconds.
NOTES: • Press REC to increase the time needed for recording (See the chart ).
•To cancel OTR, press
STOP ( 
) or turn off the power.
OTR 0 : 30
CH 125
Press | Recording time |
once | NORMAL REC |
twice | 0:30 |
|
|
3 times | 1:00 |
4 times | 1:30 |
|
|
5 times | 2:00 |
|
|
6 times | 3:00 |
7 times | 4:00 |
|
|
8 times | 5:00 |
9 times | NORMAL REC |
|
|
3 | Press SET |
| date, then press ENTER. |
|
|
4 | Set the start time, end time, |
| channel and tape speed as in |
| step 3. |
NOTE: To record from external source, press SET
5To enter other programs, repeat step 2 through 4. Or, press MENU twice to return to the normal screen.
6Press TIMER on the Remote. The power will go off, the TIMER indicator will light and the VCR stands by for recording.
– – – – – | – – – | |||
– – – – – | – – – | |||
– – – – – | – – – | |||
– – – – – | – – – | |||
– – – – – | – – – | |||
– – – – – | – – – | |||
– – – – – | – – – | |||
| ||||
DATE | START | END | CH | - |
26(SU) | ||||
- | ||||
- | ||||
- | ||||
- | ||||
- | ||||
- | ||||
- | ||||
Watching one program while recording another
During recording…
•If you connect the TV and the VCR only using the RF connection to view pictures from the VCR, press TV/VCR on the Remote so that TV/VCR indicator goes off. (The TV broadcast being recorded disappears.)
•If you are using the AV connection to view pictures from the VCR, change the TV’s input mode from AV to TV. Then, select the channel you want to watch, on the TV.
To use the VCR while it is in timer recording standby mode Press TIMER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.