Timer Recording
Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.
Turn on the VCR and TV, and select the VCR channel (or AV mode).
NOTES:
● If all the 8 programs have already been set, “PROGRAM FULL” |
appears on the TV screen. |
● After timer recording is completed, the VCR turns off |
automatically. |
● You can program the timer recording while a regular recording |
is in progress; the menu screens will not be recorded. |
● If the tape reaches its end during timer recording, the recording |
stops and “ #“, “ ” and “ $” on the display panel blink. Press |
To use the VCR while it is in timer recording standby mode
Press TIMER, then press 1. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.
Checking, canceling or changing program settings
ADisengage timer
Press TIMER, then press 1.
●When “AUTO TIMER” ( pg. 13) is set to “ON”, you do not have to press TIMER.
TIMER to disengage timer, then press STOP/EJECT (0) on |
the VCR to eject the cassette or press POWER 1 then press |
REW (3) to rewind the tape. |
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically.
BAccess Program Check screen
Press PROG. CHECK.
CAccess Program screen
Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.
PR START | STOP | CH | DATE | ||||||
1 | 8:00P | 10:00 | 12 |
| 12/24 | ||||
2 | 10:00A | 10:45 | 40 |
| 12/25 | ||||
3 | 11:30P | 1:00 | 125 |
| 12/25 | ||||
4 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|
|
|
|
| PRESS (CHECK) TO NEXT | ||||||||
| PROGRAM 1 |
|
|
| |||||
| START |
|
|
| STOP |
|
|
| |
| 8:00 PM |
|
|
| 10:00 PM |
| |||
| DATE |
|
|
| CH |
|
|
| |
| 12/24/03 |
|
|
| 12 |
| SP |
|
|
TIMER
APress PROG. on the Remote to access the Program screen.
B Press START / | (Number keys “1” |
| PROGRAM 1 |
| |||||||||||
and/or “4”), STOP | / | (Number |
| START | STOP |
| |||||||||
keys “2” and/or “5”), DATE | / |
| – |
|
|
| – |
| |||||||
| DATE | CH |
| ||||||||||||
(Number keys “3” and/or “6”) or |
| – |
|
|
| – – – |
| SP |
|
| |||||
|
|
| |||||||||||||
|
|
|
|
| |||||||||||
CH / | repeatedly to enter the start |
|
| ||||||||||||
PRESS |
| ||||||||||||||
time, stop time, date or channel. | 9=WEEKLY), THEN (0K) |
| |||||||||||||
● Press and hold START | / | or | PRESS (PROG.) TO END |
| |||||||||||
|
|
|
|
|
|
|
|
|
|
| |||||
STOP | / to increase the time in |
|
|
|
|
|
|
|
|
|
|
| |||
●To set the tape speed, press SP/EP.
●To
CPress OK or PROG..
●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display” ( pg. 12).
DPress TIMER. The VCR turns off automatically and “#” is displayed on the display panel.
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
DCancel or change program setting
To cancel a program, press CANCEL when the Program screen you do not want is shown.
To change a program, press the appropriate button: START 
/
(Number keys “1” and/or “4”), STOP 
/
(Number keys “2” and/or “5”), DATE 
/
(Number keys “3” and/or “6”),
CH 
/
, DAILY
EReturn to normal screen
Press PROG. CHECK repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press TIMER. The VCR turns off automatically and “#” is displayed on the display panel.
●When “AUTO TIMER” ( pg. 13) is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.
— 11 —