– Timer Recording –
Program overlap warning display
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.
| PR START | STOP | CH | DATE | ||
PROGRAM NOT COMPLETED | 1 | 8:00P | 10:00 | 12 | 12/24 |
|
2 | 10:00A | 10:45 | 40 | 12/25 |
| |
PROGRAM OVERLAP | 3 | 11:30P | 1:00 | 125 | 12/25 |
|
4 | 9:00P | 10:00 | 10 | 12/24 |
| |
| 5 |
|
|
|
|
|
| 6 |
|
|
|
|
|
| 7 |
|
|
|
|
|
| 8 |
|
|
|
|
|
| ( | , ), THEN ( ) (PROG.) : END | ||||
Example:
Program 1 (you have just made) and Program 4 overlap each other
A Select program to modify
Press rt, then press e.
● You can only select one of the overlapping programs.
● If you do not mind this overlap, press
PROG. to finish the timer program setting. The program starting earlier or
program with the lower program number will be recorded.
B Cancel or change program setting |
| PROGRAM 4 |
To cancel a program, press CANCEL when | START | STOP |
the Program screen you do not want is | 9:00PM | 10:00PM |
DATE | CH | |
shown. | 12/24/03 | 10 SP |
WED |
|
Other Functions
Checking tape position
When you change the VCR operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Search or Instant Review, the tape
position indicator appears. | B | + | + | + |
| E |
| ||||||
|
| REMAIN |
| 1:00 | ||
The position of “q” in relation to “B” |
|
|
| |||
|
| COUNT |
| 1:23:45 | ||
(Beginning) or “E” (End) shows you where you are on the tape.
●Set “SUPERIMPOSE” to “ON”. ( pg. 13)
Changing display information
Each time you press DISPLAY, the display panel shows the channel number and the clock time alternatively. ● You can change display in the stop, recording or
during picture search. ● When “SUPERIMPOSE” is set to “ON”
( pg. 13) and DISPLAY on the Remote is pressed, time counter will appear on the TV screen. To reset the time counter, press C. RESET on the Remote.
To change a program, press the | PRESS (CANCEL) TO CANCEL | |
appropriate button: START / | (Number | PRESS (OK) TO CONFIRM |
PRESS (PROG.) TO END | ||
keys “1” and/or “4”), STOP | / |
|
(Number keys “2” and/or “5”), DATE / | (Number keys “3” | |
and/or “6”), CH 
/
and/or SP/EP when the Program screen on which you want to make changes is shown, then press OK.
●If the overlap is not yet solved, the conflicting programs will be shown on the Program check screen. Repeat the above steps again.
Timer warning display
A warning appears on the TV screen to tell you that the
TIMER RECORDING TO START SOON
(CANCEL)
Tape Remaining Time
Press DISPLAY to display the tape remaining time on the screen.
NOTES:
●Set “SUPERIMPOSE” to “ON” ( pg. 13) to display the indication on the screen.
●Depending on the type of tape used, the tape remaining time may not appear right away, or is not correct. “–
— 12 —