JVC HR-VP682U manual Plug & Play Setting, Perform Plug & Play setup

Page 8

8 EN

INITIAL SETTINGS

Plug & Play Setting

Auto Clock Set/Auto Tuner Set

ATTENTION

If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately. (pg.10 – 14)

It takes several minutes for the VCR to complete the Plug & Play setting.

Do not press any buttons on the front panel or on the Remote while Plug & Play is in progress.

SP EP

VCR

This VCR sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting.

The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels. We call this TV channel the “host channel” and it is a PBS channel in your area.

1Perform Plug & Play setup

Connect the antenna cable to the VCR (pg. 6). Then connect the AC power cord to an AC outlet. Do not turn on the VCR.

The clock and tuner channels will be set automatically.

NOTES:

Auto Clock Set is performed first.

“Auto” blinks on the front display panel during Auto Clock Set.

Auto Channel Set is performed next. Auto Channel Set scans all the channels that are receivable by your VCR. During Auto Channel Set, the channel numbers are displayed as they are scanned and set.

When Plug & Play setting has been complete successfully, the correct clock time is displayed. If you perform Plug & Play setting successfully, there is no need to perform the clock (pg. 10) and tuner (pg.

13)settings. If, however, you want to add or delete channels, refer to Manual Channel Set on page 14.

During Initial Auto Clock Set

During Auto Channel Set

Plug & Play Completed

“Auto” blinks.

The channel numbers are displayed

The current time (including

 

as they are scanned and set.

AM/PM) is displayed.

*If an incorrect clock time or “– –:– –” appears on the display panel, see “What to do if Plug & Play setting failed” below.

INFORMATION

If “AUTO CLOCK” is set to “ON” on the Clock Set screen on page 11, the clock will be adjusted automatically by the host channel every hour (except 11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data. (This automatic clock adjustment can only be performed when the VCR is turned off. The clock will be adjusted just on these hours — on the time displayed on the front panel display, not on the actual real time.)

The default setting of “AUTO CLOCK” is “ON”.

If the memory backup fails, because a power outage occurs or because the AC power cord is unplugged, Plug & Play will be performed when power is restored to the VCR.

Poor antenna or cable signal may prevent the VCR from receiving the Auto clock setting data from the PBS channel. If this function is taking a considerable amount of time, it may be necessary to perform the Semiauto or Manual Clock Set procedure.

What to do if Plug & Play setting failed

If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform the Semiauto (pg. 11) or Manual Clock Set (pg. 12) procedure.

If “- -:- -” appears on the front display panel, your antenna cable may not be connected to the VCR or there may not be a Host PBS signal available in your area. Ensure that the antenna cable is connected correctly. Then turn on and off the VCR; the Plug & Play setting will be automatically reactivated.

If Plug & Play setting is not performed though the antenna cable is connected correctly, perform Manual Clock Set (pg. 12) and Auto Channel Set or Manual Channel Set (pg. 13 or 14).

Image 8
Contents HR-VP682U Dear Customer Telephone NumberPower Sources Power LinesPower Cord Protection Grounding or PolarizationAccessories Damage Requiring ServiceCleaning Replacement PartsContents Audio OUT not supplied AC Power Cord Basic ConnectionsAntenna or cable Coaxial cable Flat feeder Matching transformerCheck contents Situate VCRConnect VCR to TV Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Language Setting Access Main Menu screenAccess Initial Set screen Select languageClock Setting 10 ENPreparations Select clock setSetting clock semiautomatically Set Auto Clock to onSelect host channel Select time zoneSetting clock manually Select D.S.T. mode12 EN Manual Clock SetTuner Setting Access Tuner Set screenPerform Auto Channel Set Automatically Auto Channel SetSetting channels manually Access Manual Channel Set screen14 EN Add or skip desired channelsBasic Playback Load a cassetteBasic Playback Features 16 ENChanging display information Checking tape positionAutomatic operations after Adjusting tracking conditionSelecting monitor sound Locating beginning of timer Access distant code18 EN Locating beginningBasic RecordingSelect recording channel Set tape speedBasic Recording Features 20 ENSpecifying recording length Watching one program while recording anotherShowing on-screen display Display VCR status on TV screenErase on-screen display Accidental erasure preventionSpecial Effect Playback 22 ENLocating particular scene Rapidly Picture Search High-Speed Picture SearchViewing still picture Skipping unwanted portionsViewing slow motion picture Pause during playback24 EN VCR Plus+ Timer ProgramingAccess VCR Plus+ screen Engage timer recording standby mode To use the VCR while it is in timer recording standby modeInput receiving channel number Press SP/EPVCR Plus+ guide channel matching VCR Plus+ Setup26 EN Access Guide Channel Set screen Input guide channel numberExpress Timer Programing 28 ENTo timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings 30 ENOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify Useful Function Settings Change setting32 EN Select FunctionWhen this function is set to on When this function is set to OFF34 EN For ExampleNormal and Hi-Fi tracks. The main audio is not recorded Hi-Fi and normal tracksPreventing 36 ENEdit To Or From Another ConnectionTV Brand Setting 38 ENTurn on the TV Set TV brand codeCable Box Brand Setting Turn on the cable boxOperate cable box Ex. To set the Remote to RCADBS Receiver Brand Setting 40 ENTurn on the DBS receiver Operate DBS receiverChanging Remote Control Code Set remote control code for RemoteUnplug VCR Plug in VCRTroubleshooting 42 ENTimer Recording What happens if the tape reaches its end during recording? 44 ENCan the VCR indefinitely remain in still mode? Manual setting Preparation Semiauto setting Express timer recordingVCR PLUS+ setup List of termsFront display panel 46 ENFront panel Rear panel On-screen displayRemote How to use the Remote48 EN Specifications HOW to Locate Your JVC Service Center 50 ENLimited Warranty HR-VP682U