JVC HR-VP436U manual Assemble Editing

42

Assemble

Editing

PLAY
2	2
q 5/8	6
REC	PAUSE

1	2	3
4	5	6
7	8	9
	0
	PLAY

SP/EP

PAUSE

REC

EDITING(cont.)

Assemble Editing adds one recorded scene to another in succession.

To use your VCR as the recorder ...

LOAD CASSETTES

1 Insert the original cassette in the player, and the recording cassette in the recorder.

SET TAPE SPEED

2 Set to "SP" or "EP" by pressing the SP/EP button on the remote control.

ENGAGE RECORD-

STANDBY MODE

3 Press and hold PAUSE, and press REC.

FIND EDIT START POINT

4 Play back the original tape until you reach the scene to be edited.

START EDITING

5 When you reach the scene on the original tape to be edited, press PLAY to initiate the recorder’s record mode.

STOP EDITING

6 Press PAUSE to pause the tape in the recorder.

CONTINUE EDITING

7 Repeat steps 4 through 6 to add additional scenes.

NOTE:

Assemble Editing is also possible using your VCR as the playback deck.