JVC HR-VP436U manual Activate Instant Review, Reset Counter to Zero, Activate Counter, Memory

28

PLAYBACKANDRECORDINGFEATURES(cont.)

REW FF

Instant ReView

At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer-recorded program.

2	2
q	5/8 6

STOP

REVIEW

1	2	3
4	5	6
7	8	9
	DISPLAY
C.RESET	0

FF

REW

C.MEMORY STOP

ACTIVATE INSTANT REVIEW

1 After ensuring that the VCR is off and the Timer mode is disengaged, press REVIEW.

●The power comes on and the VCR searches for the index code indicating the start of the last timer-recorded program, then begins playback automatically.

●You can access a program 2–9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times.

●To find the very beginning of the desired program, press REW or FF and search visually for the program’s start point.

Counter Reset

1	RESET COUNTER TO ZERO
	Press C.RESET.
	NOTE:
	By pressing the DISPLAY button, you can change the
	display to show the counter reading, channel number
	or clock time. (Channel number is not displayed during
	playback.)

Counter Memory

When activated, this feature returns the tape to counter position “zero”.

	ACTIVATE COUNTER
1	MEMORY
	Press C.RESET during playback at a point you want to have
	quick access to later. The counter reads “0H 00M 00S”.
	Then press C.MEMORY. The Counter Memory indicator
	in the front display panel lights.

RETURN TO COUNTER

POSITION ZERO

2 Press STOP (during playback), then press REW. The tape rewinds and stops at approximately “0H 00M 00S” automatically.

● To cancel Counter Memory, press C.MEMORY.