Go-Video DV2130 manual Set Digital Output

Digital Output

If your A/V receiver is equipped with a Dolby Digital decoder, your DVD+VCR can output Dolby Digital 5.1 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers.

NOTE: Select “Bitstream” ONLY if you have connected a Dolby Digital-equipped A/V receiver to the Digital Output (optical or coaxial) on the DVD+VCR back panel.

Language : English

Front Display : Auto

1Open “Initial Setup” menu

Press the SETUP button while the DVD is in Stop mode.

2 Select “DVD”

Use the / buttons to highlight “DVD”, then press ENTER to select.

3 Select “Audio”

Use the / buttons to highlight “Audio”, then press ENTER to select.

4Set “Digital Output”

Use the / buttons to highlight “Digital Output”, then press

the  button to select one of the following options:

• PCM - To use your DVD+VCR with an A/V receiver NOT equipped with a Dolby Digital decoder.

• Bitstream – To use your DVD+VCR with an A/V receiver equipped with a Dolby Digital decoder.

PCM

Bitstream

PCM Down Sampling : On

27